User Manual

GM47/GM48 INTEGRATOR’S MANUAL
256
LZT 123 7263 R1A
<mt> Description
0 No SMS-DELIVER indications are routed to the TE.
No class, Class 0, class 1 and class 3 use <mem3> as
preferred storage. Class 2 messages shall be stored in the
SIM. If it this is not possible then the MS shall send an error
message accordingly to GSM 03.38
1 SMS-DELIVER is stored into ME/TA and the indication of the
memory location is routed to the TE using unsolicited result
code:
+CMTI: <mem>,<index>
2 Class 0, class 1, and class 3 SMS-DELIVERs are routed
directlytotheTEusingtheunsolicitedresultcode:
+CMT:<oa>, [<alpha>, <scts> [ ,<tooa>,<fo>,<pid>,<dcs>,
<sca>,<tosca>,<length>]<CR><LF><data> (text mode
enabled). About parameters in italics, refer to the show
text mode command, +CSDH
3 Class 3 SMS-DELIVERs are routed directly to TE using
unsolicited result codes +CMT:<oa>, [<alpha>, <scts> [
,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,<length>]<CR>
<LF><data> (Text Mode enabled). About parameters in
italics, refer to the show text mode command, +CSDH.
Messages of other data coding schemes result in
indication as defined in <mt>=1
<bm> Description
0 Store message to “BM” (or some manufacturer specific
memory). No CBM indications are routed to the TE
2 New CBMs are routed directly to the TE using unsolicited
result code:
+CBM:
<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
(Text mode enabled)
<ds> Description
0 No SMS-STATUS-REPORTs are routed to the TE
1 SMS-STATUS-REPORTs are routed to the TE using unsolicited
result code: : +CDS:
<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st> (Text mode
enabled). SMS-STATUS-REPORT is not stored in ME/TA
2 SMS-STATUS-REPORTs are routed to the TE using unsolicited
result code: +CDSI: < mem><index> (Text mode enabled).
SMS-STATUS-REPORT is stored in ME/TA
<bfr> Description
0 TA buffer of unsolicited result codes defined within this
command is flushed to the TE when <mode> 1...2 is
entered (OK response shall be given before flushing the
codes). Not supported