User Manual

16. SHORT MESSAGE SERVICES - POINT TO POINT
253
LZT 123 7263 R1A
16.11 AT+CNMI New Message Indications to TE
PDU Mode
Selects the procedure for the way in which new messages received from
the network, are indicated to the TE when it is active, e.g. DTR signal
is ON. If the TE is inactive (DTR signal is OFF), message receiving is
carried out as specified in GSM 03.38 (3G TS 23.038).
<mem3> Description
string type Memory to which received SMs are preferred to be stored
(unless forwarded directly to TE). Received CBMs are
always stored in “BM” (or some manufacturer specific
storage) unless directly forwarded to TE
“ME” ME message storage
“SM” SIM message storage
<used1>,<used2>,<used3> Description
integer type Total number of messages currently in
<mem1>, <mem2> and <mem3> respectively
<total1>,<total2> ,<total3> Description
integer type Total number of message locations in
<mem1>, <mem2> and <mem3> respectively
Description Command Possible Responses
Set new message
indication to TE
AT+CNMI=[<mode>
[,<mt>[,<bm>[,<ds>[,
<bfr>]]]]]
• +CMS ERROR: <err>
•OK
•ERROR
Shows the current
setting
AT+CNMI? •+CNMI:
<mode>,<mt>,<bm>,<ds>,
<bfr>
•OK
•ERROR
Show if the
command is
supported
AT+CNMI=? •+CNMI:
(list of supported <mode>s),
(list of supported <mt>s),
(list of supported <bm>s),
(list of supported <ds>s),
(list of supported <bfr>s)
•OK
•ERROR