User Manual

GM47/GM48 INTEGRATOR’S MANUAL
252
LZT 123 7263 R1A
16.10 AT+CPMS Preferred Message Storage
Common for both PDU and Text Modes
Selects memory storage <mem1>, <mem2> and <mem3> to be used for
reading, writing, etc. If chosen storage is not appropriate for the ME
(but is supported by the TA), final result code +CMS ERROR: <err>
shall be returned.
Test command returns lists of memory storage supported by the TA.
Description Command Possible Responses
Set preferred
message storage
AT+CPMS=<mem1>
[,<mem2>]
[,<mem3>]
•+CPMS:
<used1>,<total1>,<used2>,
<total2>,<used3>,<total3>
• +CMS ERROR: <err>
•OK
•ERROR
Read the command AT+CPMS? •+CPMS:
<mem1>,<used1>,<total1,
<mem2>,<used2>,<total2,
<mem3>,<used3>,<total3>
• +CMS ERROR: <err>
•OK
•ERROR
Show if the
command is
supported
AT+CPMS=? • +CPMS: (list of supported
<mem1>s),(list of
supported <mem2>s),(list
of supported <mem3>s)
•OK
•ERROR
<mem1> Description
string type Memory from which messages are read and deleted
(commands List Messages +CMGL, Read Message
+CMGR and Delete Message +CMGD)
“ME” ME message storage
“SM” SIM message storage
<mem2> Description
string type Memory to which writing and sending operations are
made (commands Send Message from Storage +CMSS
and Write Message to Memory +CMGW)
“ME” ME message storage
“SM” SIM message storage