User Manual

GM47/GM48 INTEGRATOR’S MANUAL
242
LZT 123 7263 R1A
16.5 AT+CMGF Message Format
Common for both PDU and Text Modes
This command tells the TA, which input and output format to use for
messages. <mode> indicates the format of messages used with send,
list, read and write commands, and unsolicited result codes resulting
from received messages. Mode can be either PDU mode (entire TP data
units used) or text mode (headers and body of the messages given as
separate parameters).
Test command returns supported modes as a compound value.
<tosca> Description
integer type GSM 04.11 (3G TS 24.011) RP SC address type-of-address
octet in integer format
129 ISDN/telephony numbering plan, national/international
unknown. Default if no “+” in sca.
145 ISDN/telephony numbering plan, international number.
Default if “+” in sca.
161 ISDN/telephony numbering plan, national number
128-255 Other values refer GSM 04.08 section 10.5.4.7
Description Command Possible Responses
Set message format AT+CMGF=<mode> •OK
•ERROR
Read the current
setting
AT+CMGF? •+CMGF:<mode>
•OK
•ERROR
Show if the command
is supported
AT+CMGF=? •+CMGF:(listof
supported
<mode>s)
•OK
•ERROR
<mode> Description
0 PDU mode
1 Text mode