User Manual

GM47/GM48 INTEGRATOR’S MANUAL
196
LZT 123 7263 R1A
• Trigger check: checks the state of the inputs..
<op> Description
0 Read
1 Write
2 Configure
3 Configure check
4 Trigger
5 Trigger check
<io> Description
“I1” Digital Input 1. Supported Operations: 0,2,3,4,5
“I2” Digital Input 2. Supported Operations: 0,2,3,4,5
“I3” Digital Input 3. Supported Operations: 0,2,3,4,5
“I4” Digital Input 4. Supported Operations: 0,2,3,4,5
“I5” Digital Input 5. Supported Operations: 0,4,5
“O1” Digital Output 1. Supported Operations: 0,1,2,3
“O2” Digital Output 2. Supported Operations: 0,1,2,3
“O3” Digital Output 3. Supported Operations: 0,1,2,3
“O4” Digital Output 4. Supported Operations: 0,1,2,3
“O5” Digital Output 5. Supported Operations: 0,1
“O6” Digital Output 6. Supported Operations: 0,1
“O7” Digital Output 7. Supported Operations: 0,1
“DA1” Digital/Analogue Input: Supported Operations: 0,1
“AD1” Analogue/Digital Output 1: Supported Operations: 0
“AD2” Analogue/Digital Output 2: Supported Operations: 0
“AD3” Analogue/Digital Output 3: Supported Operations: 0
<val> Description
0 The digital I/O is not active. The logic value is FALSE
1 The digital I/O is active. Logic value is TRUE
<adc_val> Description
0-255 The decimal value shall represent the analogue voltage it
is hold on the I/O. Applicable only to A/D or D/A signals