User Manual

185
LZT 123 7263 R1A
10. Internet
10.1 AT*ENAD Ericsson Internet Account Define
Description Command Possible Responses
Define an
Internet
account
AT*ENAD=[<index>][,<name
>,<userid>,<password>,
<bearer>,(bearer_settings)]
If <bearer>=0
(bearer_settings):=<dialup_n
r>,<dial_type>, <data_rate>
If <bearer>=1
(bearer_settings):=
<pref_serv>,<pap_chap>
If <bearer>=2
(bearer_settings):=
<bt_device_address>
•*ENAD:<index>[,<cid>]
•+CMEERROR<err>
Read the
current
settings
AT*ENAD? *ENAD:list of <index>s with corresponding
<name>, <userid>, <bearer> followed by
the list of bearer dependent parameters
If <bearer>=0
(bearer_settings):=<dialup_nr>,
<dial_type>,<data_rate>, <lock_state>
If <bearer>=1
(bearer_settings):=<pref_serv>,
<pap_chap>,<cid>,<lock_state>
If <bearer>=2
(bearer_settings):=<bt_device_address>,
<lock_state>
+CME ERROR <err>
Test if the
command
is
supported
AT*ENAD=? *ENAD:list of supported <index>s,max
length of <name>,max length of
<userid>,max length of <password>,
(0),max length of ,list of supported
<dial_type>s,list of supported
<data_rate>s,list of supported
<lock_state>s
*ENAD:list of supported <index>s,max
length of <name>,max length of
<userid>,max length of <password>, (1),list
of supported <pref_serv>s,list of supported
<pap_chap>s,list of supported
<lock_state>s
*ENAD:list of supported <index>s,max
length of <name>,max length of
<userid>,max length of <password>,
(2),max length of <bt_device_address>,
list of supported <lock_state>s
+CME ERROR <err>