User Manual

8. DATA - WAP
177
LZT 123 7263 R1A
8.9 AT*EWPA Ericsson WAP Push Access Setting
The command is used to decide if message push is allowed.
8.10 AT*EWPB Ericsson WAP Preferred Bearer
This command sets the preferred bearer for WAP. If Internet account is
chosen as the preferred bearer, the index of the Internet account to be
used shall be sent as the second parameter: <IA_index>. If SMS is
chosen as the preferred bearer a second parameter is ignored.
Description Command Possible Responses
Sets the push access AT*EWPA=<onoff> •OK
• +CME ERROR <err>
Reads the current
settings
AT*EWPA? *EWPA: <onoff>
Tests if the command is
supported
AT*EWPA=? •*EWPA:(listof
supported <onoff>s)
• +CME ERROR <err>
<onoff> Description
0 Always ask
1 Message push disabled
2 Message push enabled
Description Command Possible Responses
Set preferred WAP
carrier
AT*EWPB=<pbearer>
[,<IA_index>]
•+CMEERROR:<err>
•OK
•ERROR
Read preferred WAP
carrier
AT*EWPB? •*EWPB:<pbearer>
[,<IA_index>]
•+CMEERROR:<err>
•OK
•ERROR
Show if the command
is supported
AT*EWPB=? •*EWPB:(listof
supported
<pbearer>s),(list of
supported
<IA_index>s)
•+CMEERROR:<err>
•OK
•ERROR
<pbearer> Description
1 SMS
2 Not supported
3 Internet account