User Manual

GM47/GM48 INTEGRATOR’S MANUAL
118
LZT 123 7263 R1A
3.31 AT+CSAS Save Settings
Saves active message service settings to a non-volatile memory. A TA
can contain several settings profiles. Settings specified in commands
Service Centre Address +CSCA, Set Message Parameters +CSMP and
Select Cell Broadcast Message Types +CSCB (if implemented) are
saved. Certain settings may not be supported by the storage (e.g. SIM
SMS parameters) and therefore can not be saved.
Test command shall display the supported profile numbers for reading
and writing of settings.
3.32 AT+CSQ Signal Strength
Returns the received signal strength indication <rssi> and channel bit
error rate <ber> from the ME. Test command returns values supported
by the TA as compound values.
Description Command Possible Responses
Save Settings AT+CSAS[=<profile>] • +CMS ERROR: <err>
•OK
•ERROR
Get available
profiles
AT+CSAS=? • +CSAS: (list of supported
<profile>s)
• +CMS ERROR: <err>
•OK
•ERROR
<profile> Description
0..255 Manufacturer specific profile number where settings are
to be stored. Default is “0”.
Description Command Possible Responses
Execute Signal
Strength
AT+CSQ •+CSQ:<rssi>,<ber>
• +CME ERROR <err>
•OK
•ERROR
Test if the command is
supported
AT+CSQ=? •+CSQ:(listof
supported
<rssi>s),(list of
supported <ber>s)
• +CME ERROR <err>
•OK
•ERROR