User Manual

3. CONTROL AND STATUS
117
LZT 123 7263 R1A
3.29 AT+CR Service Reporting Control
Enables or disables display of intermediate bearer capability reports
during the handshake phase.
3.30 AT+CRC Cellular Result Code
Controls whether or not the extended format of incoming call indication
is used. When enabled, an incoming call is indicated to the TE with
unsolicited result code +CRING: <type> instead of the normal RING.
Test command returns values supported by the TA as a compound
value.
Description Command Possible Responses
Set Service Reporting
Control
AT+CR=<mode> •OK
•ERROR
Read current setting AT+CR? •+CR:<mode>
•OK
•ERROR
Test if the command is
supported
AT+CR=? •+CR:(listof
supported
<mode>s)
•OK
•ERROR
<mode> Description
0 Disable reporting. Default value
1 Enable reporting
Description Command Possible Responses
Set Cellular Result
Code option
AT+CRC=[<mode>] •OK
•ERROR
Show the current
setting
AT+CRC? •+CRC:<mode>
•OK
•ERROR
Show if the command
is supported
AT+CRC=? •+CRC:(listof
supported
<mode>s)
•OK
•ERROR
<mode> Description
0 Disables extended format
1 Enables extended format