User Manual

3. CONTROL AND STATUS
103
LZT 123 7263 R1A
3.13 AT*EMAR Ericsson Master Reset
This command requests the MS to reset user data. The user data in the
MS will be reset to the default values. This command also unlocks the
MS.
3.14 AT*EPEE Ericsson Pin Event
The command requests the MS to report when the PIN code has been
inserted and accepted.
Description Command Possible Responses
Perform a master reset
in the MS
AT*EMAR •+CMEERROR:<err>
•OK
•ERROR
Shows if the command
is supported or not
AT*EMAR=? •+CMEERROR:<err>
•OK
•ERROR
Description Command Possible Responses
Requests the MS to
inform when the PIN
code has been
inserted
AT*EPEE=<onoff> •+CMEERROR:<err>
•OK
•ERROR
Test if the command is
supported
AT*EPEE=? • *EPEE: (list of
supported <onoff>s)
•+CMEERROR:<err>
•OK
•ERROR
Read the current status
for PIN Code Request
AT*EPEE? • *EPEE: <onoff>
•+CMEERROR:<err>
•OK
•ERROR
<onoff> Description
0 Request for report on inserted PIN code is not activated
(off)
1 Request for report on inserted PIN code is activated (on)