User Manual

3. CONTROL AND STATUS
101
LZT 123 7263 R1A
• to make it possible for the TE to display call state information for an
ongoing call.
<onoff> Description
0 The call log function is disabled (off)
1 The call log function is enabled (on)
<ccid> Description
Integer (1-7) A number which uniquely defines a call in the phone (=
number of call control process). There can not be two call
id’s with the same number simultaneously. The maximum
number of call control processes is 7, 5 multiparty
members,onecallonholdandonewaitingcall
<ccstatus> Description
0 IDLE
1 CALLING (MO)
2 CONNECTING (MO)
3 ACTIVE (connection between A and B)
4 HOLD
5 WAITING (MT)
6 ALERTING (MT)
7 BUSY
<calltype> Description
1 VOICE
2 DATA
4 FAX
128 VOICE2
<processid> Description
Integer Reported when returning to the IDLE state (<ccstatus> =
0).
8=H’08=CC(Callcontrol)
68 =H’44 = MM (Mobile Management)
69 = H’45 = MS (Mobile Station)
122 = H’7A = RR (Radio Resources)
<exit cause> Description
Integer Exit cause according to GSM 04.08. Reported when
returning to IDLE state (<ccstatus> = 0)