User Guide

35
Before Using the Terminal
･
Use a compatible AC adapter or USB cable A
to C for charging. If you use a charger other
than compatible ones, charging may not be
available or operations may not be performed
correctly.
･
Insert and remove the AC adapter cord or USB
cable A to C slowly and evenly so that
excessive force is not applied.
･
When charging starts while the power is on, a
sound to indicate the start of charging is
heard, and the notification LED of the terminal
turns on (P.47).
･
To check the battery level, see the status bar at
the top of the screen or from the Home
screen, tap
u
[Settings]
u
[About phone]
u
[Status] to see "Battery level".
･
If you start charging with the terminal
powered off, a screen indicating charging
status activates although you cannot operate
the terminal. Therefore, do not charge the
battery in a place where the use of the
terminal is prohibited.
Battery Care is a function that learns your
charging habit (time zone for connecting to
charging equipment long) to adjust charging
speed and keep battery performance better
so as to extend battery life.
■
Starting "Battery Care" function
It predicts the time when charging
equipment will be disconnected by learned
charging habit and adjusts charging speed
so that the battery become fully charged at
the time.
After start of charging with Battery Care,
charging pauses once short of full charge.
And then charging resumes near estimated
full charge time to be on time for full charge
■
Switching normal charging
･
From the Home screen,
u
[Settings]
u
[Battery]
u
[Battery Care]
u
Tap to turn off Battery Care.
･
To stop Battery Care charging temporarily
to switch to normal charging, drag the
status bar down
u
Tap [Charging with
Battery Care].
❖
Note
･
It may take 7 days or more to complete learning your
habit.
Saving battery life (Battery
Care)