User Guide

32
Before Using the Terminal
2
Pull the tray straight out from the
terminal.
3
With the IC side facing up, place
the docomo nano UIM card on the
tray.
･
Make sure that the cut corner of the
card is oriented properly.
･
Be sure to fit the docomo nano UIM
card into the tray so that it does not
shift.
4
Turn the terminal horizontally and
insert the tray with the card and
press it straight into the slot.
･
Be careful about the direction to insert
of the tray.
5
Firmly press the parts until the
tray is all the way in, and make
sure that there are no gaps
between the terminal and cover.