User Manual

44
Before Using the Terminal
･
Even when silent mode is on, the following
sounds are not muted: the shutter sound; the
sounds produced when starting and ending
video recording; alarms; sounds from video
and music; and the sound produced when
you tap during a call.
･
Silent mode is canceled when you press the
volume up key to turn up the volume. Silent
mode (Vibrate) is canceled when you adjust
the "Ring volume" (P.167) in "Sound &
notification".
･
Tap on the volume control bar to adjust
the volume for media playback and alarms.
However the alarm volume set via the "Clock"
application has precedence.
Setting silent mode (Vibrate)
1
Press the volume up or down key.
2
Tap .
･
The icon in the volume control bar
changes to (white).
Setting silent mode (Mute)
1
Press the volume up or down key.
2
Tap .
3
Press the volume down key.
･
The icon in the volume control bar
changes to (gray).
･
Tap [END NOW] on the volume control
bar to cancel silent mode (mute).
･
Even when the Do not disturb function
in the Quick settings panel (P.51) is set
to "Alarms only", silent mode (mute) can
be set. To use the Do not disturb
function, tap [EDIT] and set "Do not
disturb" as an available quick setting
beforehand.
Setting silent mode