User's Manual

This is the Internet version of the user's guide. © Print only for private use.
Using mobile Internet 49
To request settings from Sony Ericsson Mobile
Internet
1. Use a PC to go to www.SonyEricsson.com. By using
the WAP and E-mail Configurator, you can request that
a text message be sent to your phone with the settings
you need.
2. When the message arrives, New settings. Install?
appears:
• Press
YES to install the new settings or
• Press
NO to cancel installation. A new request for
settings is then required, as in step 1.
To set up a WAP profile and a GSM data account
1. Scroll to WAP Services,
YES, WAP Settings, YES.
2. Select a WAP profile and press
YES.
3. Scroll to Gateway,
YES, User ID, YES.
4. Enter the User ID for your gateway and press
YES.
5. Select Password and press
YES.
6. Enter the password for your gateway and press
YES.
7. Select IP Address and press
YES.
8. Enter the IP address of your gateway and press
YES.
An IP address looks something like this:
136.225.37.163.
Note: An IP address consists of four groups of digits,
with a maximum of three digits in each group. If one of
your digit groups consists of only one or two digits,
you have to enter a zero (0) in front of the original digit
for each digit that is missing. For example, to enter the
IP number above, 136.225.37.163, write
136.225.037.163.
9. Scroll to GSM Data,
YES, Phone Number, YES.
10.Enter the phone number you use with your GSM Data
connection and press
YES.
11.Scroll to User ID and press
YES.
12.Enter the User ID for your GSM Data Connection and
press
YES.
13.Scroll to Password and press
YES.
14.Enter the password for your GSM Data Connection
and press
YES.
You have now entered the settings you need to start the
WAP browser.
Using WAP
To select a WAP profile
1. Scroll to WAP Services,
YES, Select Profile, YES.
2. Select a Select Profile,
YES.