User's Manual

46 Setting up mobile Internet
To select preferred mode
•ScrolltoConnect/Data comm./Pref. service and select
GPRS and GSM or GSM only.
Note: To see the status of GPRS coverage and
connection, slide the volume key up or down from
standby to enter the Status menu and then scroll to
GPRS.
WAP profile settings
The WAP settings are stored in a WAP profile. In most
cases you only need to use one profile to access the
Internet.
You set up and use additional WAP profiles, for
example, when accessing secure Internet sites, such as
a banking site or a corporate intranet. You then simply
switch between profiles when you need to change the
network connection.
Tip: If there are no data account or WAP profile
settings in your phone, you can enter data account
settings when you enter WAP profile settings. See WAP
services/Options/WAP profiles/Add profile?/Enter a
name/ Connect using:/Add account?/.
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
“Data account settings” on page 44.
2. Scroll to WAP services,
YES, Options, YES, WAP
profiles,
YES.
3. Select Add profile? to add a new profile or select an
existing profile that you want to edit,
YES.
When selecting Add profile? enter a name for the
profile,
YES, Connect using:, YES, select the data
account to be used,
YES and enter the IP address:, YES.
A list appears. Scroll to Save?,
YES.
Whenselectinganexistingprofile,youcandothe
following:
• Rename – Change the name of the profile.
• Connect using – Select data account.
• IP address – WAP gateway server address.
• Advanced – More profile settings, see below.
• Delete –Removetheprofile.
If you select Advanced you can also do the following:
• Chg homepage – Enter the address of the WAP site
you want as the homepage.