User's Manual

Two voice lines 57
To change the code memo password
1. Open the code memo as described above.
2. Scroll to Options and press
YES.
3. Scroll to Chg password and press
YES.
4. Enter your new password and press
YES.
5. Repeat the new password and press
YES.
6. Enter a checkword and press
YES.
Forgot your password?
If you forget your password, just enter any password
to access the Code memo function. The checkword
and codes that are then shown are incorrect. You
must now reset the Code memo.
To reset code memo
1. Scroll to Options,
YES, Reset, YES.
2. Reset code memo? appears. Press
YES.
The Code memo is reset and all entries are cleared.
The next time you enter the Code memo, you must
start at “To open the code memo for the first time”
on page 56.
Two voice lines
Your phone may have to voice lines with
different phone numbers. This may be
useful if, for example, you want to keep
business calls and private calls on different
lines.
• To select a line, scroll to Call info/Switch to line 1/2.
All outgoing calls are made on this line until you
change it. Incoming calls can still be received on
either line.
You can change the names of the lines, and have
different settings for each line, for example, different
ring signals.
• To change the name of a line, scroll to Settings/
Display/Edit line tags.
T600.book Page 57 Friday, June 14, 2002 10:07 AM