User's Manual

56 Code memo
Code memo
Instead of having to remember all the different
security codes for credit cards and so on, you can
save them encrypted in Code memo in your phone.
Then all you need to remember is the password to
open Code memo.
Using the check word function
To confirm that you have entered the correct password
in Code memo you must enter a Checkword. When
you enter your password the checkword is shown for
a short time. If the password is correct, the correct
codes are shown. If you enter the incorrect password,
the checkword and the codes that are shown are also
incorrect.
Using code memo
To open the code memo for the first time
1. Scroll to Extras,
YES, Code memo, YES. A message
appears
2. Press
YES and enter a 4 digit password to start the
code memo and press
YES.
3. Confirm the new password by entering it again.
Enter a checkword and press
YES.
The checkword can consist of both letters and digits.
To add a new code
1. Scroll to Extras,
YES, Code memo, YES.
2. Enter your password to open the code memo.
3. Select Add new code?,
YES.
4. Enter a name associated with the code, for example
the name of the credit card company, and press
YES.
5. Enter the code and press
YES.
To delete a single code
1. Open the code memo as described above.
2. Select the code you want to delete and press .
3.
Delete? appears. Press YES.
To change a code
1. Open the code memo as described above.
2. Select the code you want to change and press .
3. Select Edit.
4. Enter the name and press
YES, enter the code and
press
YES.
Tip: When a code is selected you can press to
edit or delete it.
T600.book Page 56 Friday, June 14, 2002 10:07 AM