User's Manual

50 Using the WAP browser
Using the WAP browser
Your phone has a WAP (Wireless Application
Protocol) browser which is designed to bring a
modified Internet to your mobile phone, a mobile
Internet. A wide range of services are available,
for example, news, entertainment, timetables,
reservations, banking, e-mail.
Preparing your phone for WAP
Before you can start using the WAP browser, you
have to enter settings for a WAP profile. You can
have different WAP profiles depending on how you
connect to the Mobile Internet. You could, for example,
have one WAP profile for mobile e-commerce and
another one for general WAP browsing.
Note: The settings may already be entered when you
buy the phone, or you can receive the settings from
your network operator or your service provider. You
can also receive settings from
http:// wap.sonyericsson.com
To enter the WAP settings manually
1. Scroll to WAP services,
YES, WAP settings, YES.
2. Select a WAP profile and press
YES.
3. Scroll to Gateway,
YES, User id, YES.
4. Enter the User id to your gateway and press
YES.
5. Select Password and press
YES.
6. Enter the password to your gateway and press
YES.
7. Select Data mode and press
YES.
8. Select the data mode conn.less / conn.oriented and
press
YES.
9. Select Data address and press
YES.
10. Enter the IP address to your gateway and press
YES.
11. Press
NO to go back one level in the menus.
12. Scroll to GSM data,
YES, Phone number, YES.
13. Enter the phone number you use with your GSM data
connection and press
YES.
14. Scroll to Dial type and press
YES.
15. Select Analogue or ISDN connection and press
YES.
You have now entered the settings you need to start
browsing the Internet. You may also need to enter the
following information.
16. Scroll to User id and press
YES.
17. Enter the User id for your GSM data connection and
press
YES.
T600.book Page 50 Friday, June 14, 2002 10:07 AM