User's Manual

Personalising your phone 27
•press to increase the octave.
•press to decrease the octave.
•press to change to a longer note.
•press to change to a shorter note.
•press to change to a flat or sharp note.
•press to turn the vibration on or off.
•press to change the duration specifier.
•press to add a new note above the current
note.
•press to increase or decrease the volume.
•press to delete the selected note.
• Scroll using or from one note to the next.
The highlighted line on the display shows which note
is selected.
5. Press
YES to listen to the melody.
6. Press
YES again to save the melody or NO to continue
editing the melody.
Tip: You can play a melody from the menu.
To create a repeat block of notes
1. Select the starting note of the repeat and press .
2. Select the ending note of the repeat and press .
3. Press to change the repeat count 1-9 times, or
to continually repeat.
Tip: You can add repeat blocks from the menu.
To set the volume, beat and style for a melody
1. Scroll to Settings,
YES, Sounds & alerts, YES, My
melodies,
YES.
2. Select a melody and press
YES.
3. Select a setting and press
YES.
• Set volume, to decrease or increase the volume.
• Set beat, to decrease or increase the beats per minute.
• Set style, to select a style.
4. Enter your setting and press
YES to save the setting.
Note: The volume of the melody is dependent upon
the main volume settings.
To edit the melody name and composer
1. Select the melody to edit from the Settings/Sounds &
alerts/My melodies menu and press
YES.
2. Scroll and select Melody info and press
YES.
• Press
YES once to edit the melody name.
• Press
YES twice to edit the composer name.
3. Enter a new name and press
YES.
Tip: Press when in the Melody info menu to
edit the melody name and composer name.
T600.book Page 27 Friday, June 14, 2002 10:07 AM