Manualshelf

User Guide

ManualsBrandsSony Mobile Communications ManualsElectronicsGSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC
1234
Device basics
4
3
1
2
5
6
1 Charging/Notification light
2 NFC
3 Volume/Zoom key
4 Power key
5 Nano SIM/Memory card slot
6 Charger/USB Type-C™ cable port
To insert the nano SIM card and the
memory card
Do not cut your SIM card, for example using a blade or
scissors, as this may damage your device.
1
Open the nano SIM/Memory card slot cover.
2
Using your fingernail, drag out the nano SIM card tray.
3
Firmly place the SIM card in the correct orientation as
shown in the illustration.
4
Insert the memory card in the correct orientation into its
slot as shown in the illustration.
5
Gently push the tray back into the slot until it fits into
place.
To turn on the device
It is important to use the USB Type-C™ cable (provided)
when charging your device as other types of USB cables
can damage your device. It is recommended to charge
the battery for at least 30 minutes before you turn on the
device for the first time.
1
Press and hold down the power key until the device
vibrates.
2
Wait a moment for the device to start.

Summary of content (4 pages)