C:\FY20HT_models\SB1\FY20_SB1_conditional\01USHTZ9FUC2\010COV.fm masterpage: Right 010COV.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\020REG.fm masterpage: Left 020REG.fm Page 2 Thursday, September 19, 2019 8:55 PM Owner’s Record The model and serial numbers are located on the bottom of the bar speaker. Record the serial numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding the Sound Bar. Model No. HT-G700 Serial No. WARNING To reduce the risk of fire or electric shock, do not expose this system to rain or moisture.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\020REG.fm masterpage: Right 010COV.book Page 3 Wednesday, September 18, 2019 1:58 PM – Reorient or relocate the receiving antenna. – Increase the separation between the system and receiver. – Connect the system into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\010COVTOC.fm masterpage: Left 010COV.book Page 4 Wednesday, September 18, 2019 1:58 PM Table of Contents About These Operating Instructions ............................. 5 What’s in the Box .......................... 6 What You Can Do with the System .....................................7 Guide to Parts and Controls .........
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\010COVTOC.fm masterpage: Right 010COV.book Page 5 Wednesday, September 18, 2019 1:58 PM END USER LICENSE AGREEMENT ..........................54 Precautions ..................................58 Index ............................................ 61 About These Operating Instructions • The instructions in these Operating Instructions describe the controls on the remote control.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\030PAC.fm masterpage: Left 010COV.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\030PAC.fm masterpage: Right 010COV.book Page 7 Wednesday, September 18, 2019 1:58 PM What You Can Do with the System The system supports object-based audio formats such as Dolby Atmos and DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision. “Listening to a TV and Other Devices” (page 22) Blu-ray Disc™ player, cable box, satellite box, etc. Basic connection: Refer to “Startup Guide” (separate document).
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\030PAC.fm masterpage: Left 010COV.book Page 8 Wednesday, September 18, 2019 1:58 PM Guide to Parts and Controls Details are omitted from the illustrations. Bar Speaker (Main Unit) Front (power) button Turns on the system or sets it to standby mode. (input select) button Selects the input for playback on the system. BLUETOOTH button (page 24) +/– (volume) buttons BLUETOOTH indicator – Lights in blue: BLUETOOTH connection has been established.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\030PAC.fm masterpage: Right 010COV.book Page 9 Wednesday, September 18, 2019 1:58 PM Rear TV IN (OPT) jack Input Audio Formats” (page 50). For specifications and notes on connections, see “Supported HDMI Video Formats” (page 51). HDMI IN jack For specifications and notes on connections, see “Supported HDMI Video Formats” (page 51). AC inlet UPDATE port (page 38) Connect the USB memory when updating the system.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\030PAC.fm masterpage: Left 010COV.book Page 10 Wednesday, September 18, 2019 1:58 PM Subwoofer Power indicator – Flashes quickly in green: The subwoofer is attempting to connect to the system with the manual connection. – Flashes slowly in green: The subwoofer is attempting to connect to the system. – Lights in green: The subwoofer is connected to the system. – Flashes in amber: The software is updating. – Lights in red: The subwoofer is in standby mode.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\030PAC.fm masterpage: Right 010COV.book Page 11 Wednesday, September 18, 2019 1:58 PM Remote Control INPUT (page 22) Selects the playback source. Each time you press INPUT, the selected input appears in the front panel display cyclically as follows. [TV] [HDMI] [BT] IMMERSIVE AE (page 27) Turns on/off the vertical surround function. AUTO SOUND (page 28) CINEMA (page 28) (volume) +*/– (page 23) Adjusts the volume.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\030PAC.fm masterpage: Left 010COV.book Page 12 Wednesday, September 18, 2019 1:58 PM (muting) Turns off the sound temporarily. DIMMER (page 39) AUDIO* (page 23) NIGHT (page 29) * The AUDIO and + buttons have a tactile dot. Use it as a guide during operation. About the replacement of batteries for the remote control When the system does not respond by operating with the remote control, replace two batteries with new batteries.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\040PRE.fm masterpage: Right 010COV.book Page 13 Wednesday, September 18, 2019 1:58 PM 1 Prepare two screws (not supplied) that are suitable for the wall mount holes on the rear of the bar speaker. Installing the System Installing the Bar Speaker and Subwoofer 4 mm (3/16 in) Refer to Startup Guide (separate document). More than 30 mm (1 3/16 in) Mounting the Bar Speaker on a Wall ====== 5.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\040PRE.fm masterpage: Left 010COV.book Page 14 Wednesday, September 18, 2019 1:58 PM 3 Fasten the screws into the marks () on SCREW LINE () of WALL MOUNT TEMPLATE as in the illustration below. 368.5 mm (14 1/2 in) 368.5 mm (14 1/2 in) Notes • When sticking WALL MOUNT TEMPLATE, smooth it out fully. • When you do not use WALL MOUNT TEMPLATE, install the bar speaker apart from the TV by 70 mm (2 3/4 in) or more. Screws Marks () 10.5 mm to 11.5 mm (approx.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\040PRE.fm masterpage: Right 010COV.book Page 15 Wednesday, September 18, 2019 1:58 PM Connecting the Subwoofer Connecting the Subwoofer Automatically The subwoofer is connected to the system automatically when they are turned on. For details, refer to Startup Guide (separate document) for the subwoofer connection.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\040PRE.fm masterpage: Left 010COV.book Page 16 Wednesday, September 18, 2019 1:58 PM When the TV Remote Control does not Work When the bar speaker obstructs the remote control sensor of the TV, the TV remote control may not work. In that case, enable the IR repeater function of the system. You can control the TV with the TV remote control by sending the remote signal from the rear of the bar speaker.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\050CON.fm masterpage: Right 010COV.book Page 17 Wednesday, September 18, 2019 1:58 PM Connecting to a TV or AV Device Connecting to a TV or AV Device with the HDMI Cable To connect a 4K TV or 4K devices See “Connecting a 4K TV and 4K Devices” (page 20). To connect a TV compatible with eARC For the connection, refer to Startup Guide (separate document). For the settings, see “[EARC]” (page 36).
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\050CON.fm masterpage: Left 010COV.book Page 18 Wednesday, September 18, 2019 1:58 PM 4 INPUT 5 6 BLUETOOTH button 7 1 2 3 Turn on the TV. Turn on the system. Press and hold the BLUETOOTH button on the bar speaker and INPUT on the remote control simultaneously for 5 seconds. The system enters the pairing mode, [PAIRING] appears in the front panel display, and the BLUETOOTH indicator flashes twice repeatedly.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\050CON.fm masterpage: Right 010COV.book Page 19 Wednesday, September 18, 2019 1:58 PM • When you connect the system and TV with the HDMI cable (supplied), the BLUETOOTH connection is canceled. To connect the system and TV with the BLUETOOTH function again, disconnect the HDMI cable, then perform the connecting operation from the start.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\050CON.fm masterpage: Left 010COV.book Page 20 Wednesday, September 18, 2019 1:58 PM Connecting a 4K TV and 4K Devices All HDMI jacks on the system support 4K video format, HDCP2.2, and HDCP2.3 (High-bandwidth Digital Content Protection System Revision 2.2 and 2.3). To watch 4K video content, connect the 4K TV and 4K devices to the system via an HDCP2.2 or HDCP2.3-compatible HDMI jack on each device. You can only view 4K video content through the HDCP2.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\050CON.fm masterpage: Right 010COV.book Page 21 Wednesday, September 18, 2019 1:58 PM 6 Turn on the system. Tip • If the picture is not displayed while [FORMAT] is set to [ENHANCED], set it to [STANDARD]. 4K content can be watched by a device compatible with HDCP2.2 or HDCP2.3 even though devices with different versions (ex. TV compatible with HDCP2.2 and 4K device compatible with HDCP2.3) are connected.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\060LST.fm masterpage: Left 010COV.book Page 22 Wednesday, September 18, 2019 1:58 PM BT input BLUETOOTH device that supports A2DP For details, see “Listening to Music/ Sound with the BLUETOOTH® Function” (page 24). Listening to Music/Sound Listening to a TV and Other Devices 2 Adjust the volume (page 23). Tip You can also select the input by pressing on the bar speaker. INPUT 1 Press INPUT repeatedly.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\060LST.fm masterpage: Right 010COV.book Page 23 Wednesday, September 18, 2019 1:58 PM Adjusting the Volume Enjoying Multiplex Broadcast Sound (AUDIO) You can enjoy multiplex broadcast sound when the system receives a Dolby Digital multiplex broadcast signal. +/– SW +/– To adjust the system volume Press +/–. The volume level appears in the front panel display. To adjust the subwoofer volume Press SW (subwoofer volume) +/–.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\060LST.fm masterpage: Left 010COV.book Page 24 Wednesday, September 18, 2019 1:58 PM HDMI IN jack with an HDMI cable (not supplied). • If your TV’s HDMI IN jack is not compatible with eARC or ARC (page 32), connect the TV to the TV IN (OPT) jack with an optical digital cable (not supplied) to receive a Dolby Digital signal.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\060LST.fm masterpage: Right 010COV.book Page 25 Wednesday, September 18, 2019 1:58 PM To check the connection status of the BLUETOOTH function 2 3 4 5 6 On the mobile device, search the system by performing the pairing operation. The list of the BLUETOOTH devices that are searched appears on the screen of the mobile device. For the operation method to pair the BLUETOOTH device to the mobile device, refer to the operating instructions of the mobile device.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\060LST.fm masterpage: Left 010COV.book Page 26 Wednesday, September 18, 2019 1:58 PM Listening to Music from the Paired Device Tip When the connection is not established, select “HT-G700” on the mobile device. INPUT 1 2 3 4 5 Turn the BLUETOOTH function of the mobile device to on. Press INPUT repeatedly to select [BT]. The system automatically reconnects to the mobile device it was most recently connected to.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\070SOU.fm masterpage: Right 010COV.book Page 27 Wednesday, September 18, 2019 1:58 PM 1 Adjusting the Sound Quality Enjoying Immersive Surround Experience (IMMERSIVE AE) You can feel immersed by the sound from not only the horizontal direction, but also from the upward direction by using Vertical Surround Engine* effectively for sound modes (page 28). This function also works for the 2.0 channel signal such as a TV program.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\070SOU.fm masterpage: Left 010COV.book Page 28 Wednesday, September 18, 2019 1:58 PM Setting the Sound Effect that is Tailored to Sound Sources (Sound Mode) You can easily enjoy pre-programmed sound effects that are tailored to different kinds of sound sources. Sound mode Explanation [CINEMA] You feel immersed by the sound that travels behind you and surrounds your entire body. This mode is suitable for watching movies.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\070SOU.fm masterpage: Right 010COV.book Page 29 Wednesday, September 18, 2019 1:58 PM Making Dialogs Clearer (VOICE) Enjoying Clear Sound with Low Volume at Midnight (NIGHT) VOICE 1 2 NIGHT Press VOICE. The voice mode appears in the front panel display. Press the button repeatedly to select the voice mode. Mode Explanation [Vo.ON] Dialog is easily heard by enhancing dialog range. [Vo.OFF] 1 2 Press NIGHT.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\070SOU.fm masterpage: Left 010COV.book Page 30 Wednesday, September 18, 2019 1:58 PM Checking the Current Sound Settings You can check the current settings of the sound mode, IMMERSIVE AE, voice mode, night mode, and current stream information. DISPLAY / 1 2 Press DISPLAY. The current setting appears in the front panel display. Press repeatedly to select the item you want. The current setting appears in the following order.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\080HDM.fm masterpage: Right 010COV.book Page 31 Wednesday, September 18, 2019 1:58 PM Tip Using the Control for HDMI Function Using the Control for HDMI Function Connecting a device such as a TV or Bluray Disc player compatible with the Control for HDMI function* using an HDMI cable enables you to easily operate the device by a TV remote control. The following functions can be used with the Control for HDMI function.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\080HDM.fm masterpage: Left 010COV.book Page 32 Wednesday, September 18, 2019 1:58 PM with the TV power even if the TV is turned on. eARC/ARC (Enhanced Audio Return Channel/Audio Return Channel) If the system is connected to a TV’s HDMI IN jack compatible with eARC or ARC, you can listen to TV sound from the speakers of the system without connecting an optical digital cable. On the system, set [HDMI] - [EARC] to [ON] (page 36). The default setting is [ON].
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\080HDM.fm masterpage: Right 010COV.book Page 33 Wednesday, September 18, 2019 1:58 PM Using the “BRAVIA” Sync Function In addition to the Control for HDMI function, you can also use the “BRAVIA” sync function such as the Sound mode/ Scene Select function. Note This function is proprietary functions of Sony. This function cannot operate with products other than those manufactured by Sony.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm masterpage: Left 010COV.book Page 34 Wednesday, September 18, 2019 1:58 PM Changing the Settings Using the Setting Menu You can set the following items with the setting menu. Your settings are retained even if you disconnect the AC power cord (mains lead). 1 2 3 4 Press MENU to turn on the setting menu in the front panel display. Press / repeatedly to select the item, then press ENTER. You can select the following items.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm masterpage: Right 010COV.book Page 35 Wednesday, September 18, 2019 1:58 PM Items [AUDIO] (Audio settings) Function [DRC] (Audio DRC) You can compress the dynamic range of the sound track. [AUTO]: Automatically compresses sound encoded in Dolby TrueHD. [ON]: Reproduces the dolby and DTS sound track with the kind of dynamic range that the recording engineer intended. [OFF]: No compression of dynamic range.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm masterpage: Left 010COV.book Page 36 Wednesday, September 18, 2019 1:58 PM Items [HDMI] (HDMI settings) Function [CONTROL FOR HDMI] • [ON]: The Control for HDMI function is enabled. Devices connected with an HDMI cable can control each other. • [OFF]: Off [STANDBY THROUGH] This function is available when you set [CONTROL FOR HDMI] to [ON].
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm masterpage: Right 010COV.book Page 37 Wednesday, September 18, 2019 1:58 PM Items [BT] (BLUETOOTH settings) Function [POWER] (BLUETOOTH Power) You can turn the BLUETOOTH function on or off. • [ON]: Turns the BLUETOOTH function on. • [OFF]: Turns the BLUETOOTH function off. Note When the BLUETOOTH function is set to off, the BLUETOOTH input is skipped while selecting input by pressing INPUT.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm masterpage: Left 010COV.book Page 38 Wednesday, September 18, 2019 1:58 PM Items [UPDATE] (Updating the system) Function [START] Select this to start the software update after connecting the USB memory on which the software update file is stored to the system. For information about the software update, visit the following website: https://www.sony.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm masterpage: Right 010COV.book Page 39 Wednesday, September 18, 2019 1:58 PM Changing the Brightness of the Front Panel Display and Indicators (DIMMER) about 10 seconds. However, in some cases, the front panel display may not turn off. In this case, the brightness of the front panel display is same as [DARK]. You can change the brightness of the followings. • Front panel display • BLUETOOTH indicator • Power indicator on the subwoofer.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\090SET.fm masterpage: Left 010COV.book Page 40 Wednesday, September 18, 2019 1:58 PM Saving Power in Standby Mode Check that you have made the following settings: – [SYSTEM] - [AUTO STANDBY] is set to [OFF] (page 37). (The default setting is [OFF].) – [BT] - [STANDBY] is set to [OFF] (page 37). (The default setting is [ON].
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm masterpage: Right 010COV.book Page 41 Wednesday, September 18, 2019 1:58 PM Troubleshooting Troubleshooting If the system does not work properly, handle it in the following order. 1 Search for the cause and solution of the issue using this troubleshooting. 2 Reset the system. All the settings of the system return to their initial status. For details, see Resetting the system (page 47).
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm masterpage: Left 010COV.book Page 42 Wednesday, September 18, 2019 1:58 PM channel that you want using the TV remote control. When there is no picture while the HDMI input is selected, press the playback button of the connected device. Disconnect the HDMI cable, then connect it again. Make sure that the cable is firmly inserted.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm masterpage: Right 010COV.book Page 43 Wednesday, September 18, 2019 1:58 PM perform the connecting operation from the start (page 17). No TV sound is output from the system. Check the type and connection of the HDMI cable or optical digital cable that is connected to the system and the TV (refer to the supplied Startup Guide). Disconnect the cables that are connected between the TV and the system, then connect them firmly again.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm masterpage: Left 010COV.book Page 44 Wednesday, September 18, 2019 1:58 PM being played. If you do not want to change the sound mode automatically, set the sound mode to a setting other than [AUTO SOUND]. The TV sound from the system lags behind the image. Set [AUDIO] - [SYNC] to [0ms] if it is set to the range between 40 msec and 120 msec (page 35). A time gap between the sound and picture may occur depending on the sound source.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm masterpage: Right 010COV.book Page 45 Wednesday, September 18, 2019 1:58 PM is canceled and the system returns to the previous status. Set the night mode to off (page 29). Sound skips or has noise. If there is a device nearby that generates electromagnetic waves, such as a wireless LAN or a microwave oven in use, locate the system apart from it. If there is an obstacle between the bar speaker and the subwoofer, move or remove it.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm masterpage: Left 010COV.book Page 46 Wednesday, September 18, 2019 1:58 PM TV remote control does not work. This problem might be solved by setting [SYSTEM] - [IR REPEATER] to [ON] (page 37). Others The Control for HDMI function does not work properly. Check the connection with the system (refer to the supplied Startup Guide). Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\100TBS.fm masterpage: Right 010COV.book Page 47 Wednesday, September 18, 2019 1:58 PM Resetting the system If the system still does not operate properly, reset the system as follows. 1 Press MENU. The setting menu appears in the front panel display. 2 Press / to select [RESET], then press ENTER. 3 Press / to select [ALL RESET], then press ENTER. 4 Press / to select [START], then press ENTER. All the settings return to their initial status.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Left 010COV.book Page 48 Wednesday, September 18, 2019 1:58 PM BLUETOOTH section Additional Information Specifications Bar Speaker (SA-G700) Amplifier section U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 4 ohms loads, both channels driven, from 200 - 20,000 Hz; rated W per channel minimum RMS 35 W XX ==== power, with no more than 1% total harmonic distortion from 250 mW to rated output.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Right 010COV.book Page 49 Wednesday, September 18, 2019 1:58 PM General Power requirements 120 V AC, 60 Hz Power consumption ===On: XX W 45 W Standby mode: 0.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Left 010COV.book Page 50 Wednesday, September 18, 2019 1:58 PM Supported Input Audio Formats Audio formats supported by this system are as follows. Format Function [HDMI] [TV] (eARC) [TV] (ARC) [TV] (OPT) LPCM 2ch LPCM 5.1ch – – LPCM 7.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Right 010COV.book Page 51 Wednesday, September 18, 2019 1:58 PM Supported HDMI Video Formats Video formats supported by this system are as follows. Resolution Frame Rate 4K 4096 × 2160p 3840 × 2160p 50/59.94/60 Hz 23.98/24/25/29.97/30 Hz 50/59.94/60 Hz 4K 4096 × 2160p 3840 × 2160p 23.98/24/25/29.97/30 Hz 1920 × 1080p 25/29.97/30/50/ 59.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Left 010COV.book Page 52 Wednesday, September 18, 2019 1:58 PM • HDMI IN and HDMI OUT (TV eARC/ARC) jacks support bandwidth up to 18 Gbps, HDCP2.2 and HDCP2.31), BT.2020 wide color spaces2), and HDR (High Dynamic Range)3) contents pass-through. • When connecting to a TV with a resolution that is different from that of the system, the system may restart to reset the picture output setting. 1) 2) 3) HDCP2.2 and HDCP2.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Right 010COV.book Page 53 Wednesday, September 18, 2019 1:58 PM On BLUETOOTH Communication • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Left 010COV.book Page 54 Wednesday, September 18, 2019 1:58 PM COPYRIGHT END USER LICENSE AGREEMENT IMPORTANT: BEFORE USING THE SOFTWARE, PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY. BY USING THE SOFTWARE YOU ARE ACCEPTING THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS OF THIS EULA, YOU MAY NOT USE THE SOFTWARE. This EULA is a legal agreement between you and Sony Electronics Inc. (“SONY”).
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Right 010COV.book Page 55 Wednesday, September 18, 2019 1:58 PM The software, network services or other products other than SOFTWARE upon which the SOFTWARE’S performance depends might be interrupted or discontinued at the discretion of the suppliers (software suppliers, service suppliers, or SONY).
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Left 010COV.book Page 56 Wednesday, September 18, 2019 1:58 PM control, direct life support machines, or weapons systems, in which the failure of the SOFTWARE could lead to death, personal injury, or severe physical or environmental damage (“HIGH RISK ACTIVITIES”).
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Right 010COV.book Page 57 Wednesday, September 18, 2019 1:58 PM OR LIMITATION MAY NOT APPLY TO YOU. GOVERNING LAW AND JURISDICTION AUTOMATIC UPDATE FEATURE The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this EULA. This EULA shall be governed by the laws of Japan, without regards to conflict of laws provisions.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Left 010COV.book Page 58 Wednesday, September 18, 2019 1:58 PM SOLE DISCRETION BY POSTING NOTICE ON A SONY DESIGNATED WEB SITE, BY EMAIL NOTIFICATION TO AN EMAIL ADDRESS PROVIDED BY YOU, BY PROVIDING NOTICE AS PART OF THE PROCESS IN WHICH YOU OBTAIN UPGRADES/UPDATES OR BY ANY OTHER LEGALLY RECOGNIZABLE FORM OF NOTICE. If you do not agree to the amendment, you should promptly contact SONY for instructions.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Right 010COV.book Page 59 Wednesday, September 18, 2019 1:58 PM block the ventilation holes and cause malfunctions. • Do not place metal objects other than a TV around the system. Wireless functions may be unstable. • If the system is being used in combination with a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the system away from the TV, VCR, or tape deck.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\110OTH.fm masterpage: Left 110OTH.fm Page 60 Wednesday, September 18, 2019 3:58 PM Copyrights and Trademarks This system incorporates Dolby* Digital and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Dolby Atmos, Dolby Vision, and the double-D symbol are trademarks of Dolby Laboratories. **For DTS patents, see https:// patents.dts.com. Manufactured under license from DTS, Inc.
C:\FY20HT_models\SB1\ANKI\UC2\01US-HTZ9FUC2\120COVIX.fm masterpage: Right 010COV.book Page 61 Wednesday, September 18, 2019 1:58 PM Index A ARC (Audio Return Channel) 9, 32 AUTO STANDBY 37 B BT.2020 52 C Control for HDMI 31 D DIMMER 39 E eARC (Enhanced Audio Return Channel) 9, 32, 36 H HDCP2.2 and HDCP2.
C:\FY20HT_models\SB1\FY20_SB1_conditional\00COVHTZ9FUC2\170BCO.fm masterpage: Left 170BCO.fm Page 36 Wednesday, September 18, 2019 11:27 AM Support pages Pages d’assistance Páginas de soporte Find information on software updates: Trouvez des informations sur les mises à jour de logiciel : Encuentre información sobre las actualizaciones de software: http://www.sony.
