Mobile Phone User's Guide

Using the Phonebook Menu
38 Some menus/features are operator dependent.
N
o
t
f
o
r
c
o
m
m
e
r
c
i
a
l
u
s
e
1 Scroll to Phonebook, Select , Calling Cards, Select.
2 Enter your phonelock code, OK .
3 Scroll to Card Setup, Select , Add New, Select.
4 Enter the name of your calling card, OK .
5 Enter the access number of the calling card
server,
OK .
6 Choose the dialing delay (the amount of time the
phone waits before sending the tones),
Select .
7 Select which you want to send first, the number
that you want to call or the verification code,
Select.
8 Follow the prompts, entering the verification
number, next dialing delay, and dialed number
(order will vary depending on what you select in
Step 7).
Set CallingCards
If you have saved more than one calling card, you must
choose which card you want to use before making a
calling card call.
1 Scroll to
Phonebook, Select , Calling Cards, Select.
2 Enter your phonelock code.
3 Scroll to Set CallingCards, Select.
4 Choose the card that you want to use, Select .
Making a Calling Card Call
1 Enter or recall the phone number you want to call.
2 Press and hold the left softkey. If a card is already
selected, the phone will quickly display the calling
card number and then begin making the call.
If None is selected,
Select Card? will appear.
3 Press
Ye s to select a calling card.
4 Enter your phonelock code.
5 Select
Set CallingCards.
6 Choose a calling card.
7 Release the key after the number has been
displayed.
Editing or Deleting Calling Cards
Scroll to Phonebook, Select , Calling Cards, Select ,
enter your Phonelock code,
Select , Card Setup, select
Note!
If you are using stops between numbers, you
must press the left softkey
to send the next
sequence of numbers. If you use pauses, the
numbers are sent automatically after the specified
length of time chosen for the dialing delay.