User Manual

Draft for Sony Ericsson -- Preliminary Copy
Security 69
5 Enter the access number of the calling card server,
OK.
6 Choose the dialing delay (the amount of time the
phone waits before sending the tones),
Select.
7 Select which you want to send first, the verification
number or the number that you are dialing,
Select.
8 Follow the prompts, to enter the verification number
and the next dialing delay (the order will vary
depending on what you select in Step 7).
Selecting a Card
1 Scroll to Contacts, Select, Calling Cards, Select.
2 Enter your phonelock code,
OK.
3 Scroll to
Set Card, Select, choose a card, Select.
Making a Calling Card Call
1 Enter the phone number you want to call or retrieve
it from your Contacts.
2 Press and hold
Call.
The phone will briefly display the calling card number
and begin making the call.
Note: If you use stops between numbers, you must press the
left softkey to send the next sequence of numbers after
the stop.
Accept Calls
With the accept calls feature, you can choose to have
your phone ring only when receiving calls only from
certain numbers. The options for which calls will ring
are
From All, From List, or From None. Other calls will
make the phone flash, but it will not ring or vibrate.
To Set the Accept Calls Option
1 Scroll to Settings, Select, Call Options, Select,
Accept Calls, Select, Accept Options, Select.
2 Choose the option you want to use,
Select.
To Add Numbers to the Accepted
Callers List
1 Scroll to Settings, Select, Call Options, Select,
Accept Calls, Select, Accept List, Select.
2 Scroll to
Add to List, Add.
T606UG-R1.book Page 69 Monday, December 30, 2002 11:57 AM