User Manual

Draft for Sony Ericsson -- Preliminary Copy
Using Voice Control 53
4 The phone will prompt you to train each word
within that group.
5 If the function associated with the command group
is dependent on another command, you will be
prompted to train those commands too.
Note: You can exit group training at any time without losing
the commands you have just trained.Training All
Commands
Training All Commands
1 Scroll to
Settings, Select , Voice Control, highlight
VoiceCommands.
2 Press
and choose Train All.
3 The phone will prompt you to train each word.
Listening to Current Commands
1 Scroll to Settings, Select , Voice Control, Select ,
Manage Commands, Select .
2 Choose a group of commands.
3 As you scroll through the list, the commands will
be played back to you. If a command has not been
recorded, the command will be spoken via a pre-
recorded voice.
Note: If there is only one word for the selected command
group, press and choose Play Cmnd.
Resetting Default Commands
There are three ways to reset commands:
Resetting Single Commands
1 Scroll to
Settings, Select , Voice Control, Select ,
Manage Commands, Select .
2 Choose a group of commands.
3 Select the word you want to reset.
4 Press and choose
Reset Cmnds.
5 Confirm your selection.
Resetting Command Groups
1 Scroll to
Settings, Select , Voice Control, Select ,
Manage Commands, Select .
2 Highlight to the command group you want to reset.
3 Press and choose
Reset Group.
4 Confirm your selection.
T606UG-R1.book Page 53 Monday, December 30, 2002 11:57 AM