User Manual

Draft for Sony Ericsson -- Preliminary Copy
Speed and Super Speed Dialing 27
Speed and Super Speed Dialing
Speed Dialing
Enter the position number and press Call. Each
contact’s phone number that you save in your phone is
assigned a default position number. You can speed dial
the numbers in these positions using the position
number. You can also change the position of a contact’s
number in the speed dial list.
Note: The position numbers begin with position 2. Position
1 is reserved for voicemail.
Changing Position Numbers
1 Scroll to Contacts, Select, Advanced, Select, Speed
Dial settings
, Select.
2 Scroll to the number you want to move,
Select.
3 Scroll to the new position for the number, Select.
SuperSpeed Dialing
You can super speed dial the phone numbers in
positions 2–999 by pressing and holding the position
number in standby mode.
Note: You must select Super Speed Dial as the Long
Press
setting before you can use it. See “Long Press”
on page 27.
• For positions 2–9, press and hold the number.
• For positions 10–99, enter the first digit, then press
and hold the second digit.
• For positions 100–999, enter the first and second
digits, then press and hold the third digit.
Long Press
You can choose the action that results from a long
press (pressing and briefly holding) of the numeric keys
2–9. The options are
Super Speed Dial (dials the
number in that speed dial position), Contacts shortcut
T606UG-R1.book Page 27 Monday, December 30, 2002 11:57 AM