User Manual

Draft for Sony Ericsson -- Preliminary Copy
Personalizing Your Phone 17
2 Press the joystick right to increase the volume or left
to decrease it.
3 Press
Save to save the setting.
Note: To turn the ring signal On or Off from standby, press
and hold
C, then select Turn On Sile nt or Turn off
Silent.
To Set Increasing Ring Signal
You can choose a ring signal that gets louder in steps
from the lowest volume to the highest.
1 Scroll to
Settings, Select, Sounds, Select, Increasing
Ring
, Select.
2 Choose
On or Off, Select.
To Set Specific Ring Signals for Personal Calls
You can assign a personal ring signal for callers who are
in your contact list. If the caller’s number is identified
by Caller ID and the phone matches the number to the
contact, and the ring signal you assigned to the contact
is used.
To Set a Specific Ring Signal for a Caller
1 Scroll to
Contacts, Select, Personal Rings, Select,
Add new?, Select.
2 Choose the contact,
Select.
3 Choose a ring signal,
Select.
Message Sounds
You can select different sounds to notify you when you
have received a message. Each type of message can
have a unique sound.
To Set a Message Sound
1 Scroll to
Settings, Select, Sounds, Select, Set
Message Sounds
, Select.
2 Scroll to one of the following:
•
Voicemail, Select.
• Text, Select.
•
Page, Select.
3 Select the sound you want to use, Select.
Alarm Sounds
You can select a sound you want to notify you when an
alarm is due.
T606UG-R1.book Page 17 Monday, December 30, 2002 11:57 AM