User's Guide

WAP 75
Settings for Dial-Up Connection
Phone Number – the phone number of your Internet
service provider.
User id, Password, Passwd. request. Same as for GPRS
above.
Data rate – select the speed you want for the
connection.
Dial type – select analog or ISDN connection.
If you want to change access type, you have to create a
new data account and select the access type you want to
use.
Data Settings
If you have selected GPRS as the access type, the
Preferred service should be set to
GPRS&GSM. An icon
may then appear in the display telling you that GPRS is
within range. See “Icons” on page 92. If you have
selected
Dial-Up Connection as the access type, you
should select
GSM only as the preferred service. This
setting is valid for all data accounts.
Selecting a preferred service
1 Scroll to
Settings, Data comm., Pref. service.
2 Make your selection.
Data Counters
To check how much data you have sent and received,
using GPRS, scroll to
Call Info, Data Counters, Last
Session
or Total Data.
Using the WAP browser
Starting to browse
1 First select the WAP profile you want to use.
2 Scroll to
Browser.
3 Select one of the following (dependent upon your
service provider):
• Open your homepage.
• Go to one of your bookmarks. Select
Bookmarks.
Note!
Your service provider may provision your WAP
settings so they are not viewable on your phone.
Note!
To see the status of GPRS coverage and
connection, press the upper or lower side
volume key from standby to enter the Status
menu and then scroll to GPRS.
T62u.book Page 75 Thursday, June 13, 2002 6:47 PM