User's Guide

74 WAP
Creating a data account
1 Scroll to
Settings, Data comm., Data accounts, Add
account?
.
2 Enter a name for the data account.
3 Select an access type.
4 Enter the settings that you have received from your
operator.
For GPRS: access point name (APN), user id, and
password.
For Dial-Up Connection: phone number, user id, and
password.
Confirm each setting.
5 Scroll to
Save?.
Entering additional settings for a data account
1 Scroll to
Settings, Data comm., Data accounts.
2 Select a data account.
3 Press
Edit.
4 Select the setting you want to edit. Edit the setting.
5 Repeat step 4 for all the settings you want to edit.
Settings for GPRS
APN – the address of the external data network you want
to connect to, either an IP address or a text string.
User id – your user id to log on to the external data
network.
Password – your password to log on to the external data
network.
Passwd. request (Password request) – if this setting is
on, you are asked for a password each time you log on to
the external data network.
Allow calls – if you want to allow incoming
calls during a GPRS session, select
ON. If not,
select
OFF.
IP address – the IP address that the phone uses when
communicating with the network. If you do not enter a
value, the network provides you with a temporary IP
address.
DNS (Domain name server) - the name that the server
translates into a number.
Basic settings (Basic settings) – these are optional.
Consult your network operator.
Note!
Your service provider may provision your WAP
settings so they are not viewable on your phone.
T62u.book Page 74 Thursday, June 13, 2002 6:47 PM