User's Guide

50 Voicemail
Adding a new participant
1 Press
Hold to put the conference call on hold.
2 Call the next person you wish to include in the
conference call.
3 Scroll to
Ongoing Call, Join Calls.
4 Repeat steps 1 to 3 to include more participants.
Checking the participants in the conference
group
1 Scroll to
Ongoing Call, Parties in Conf.
The first participant’s phone number is displayed, if
available. Otherwise the display shows part 1, 2, etc.
2 Tilt the joystick up or down to check the other
participants.
Having a private conversation
You can have a private conversation with one of the
participants and put the other participants on hold.
Extracting a participant
1 Scroll to
Ongoing Call, Extract Part.
2 Select the participant.
You may now have a private conversation with the
participant.
Rejoining the participant to the conference
group
Scroll to
Ongoing Call, Join Calls.
Releasing Participants
You can release participants from the conference group
one by one or all at once.
Releasing a participant
• Scroll to
Ongoing Call, Release Part.
• Select the participant.
Releasing all participants
Scroll to
Ongoing Call, Release All.
Making a Call during a Conference Call
You can put the conference group on hold and make
another call. You can then switch between the new call
and the conference call.
Putting the conference group on hold to make a
new call
1 Press
Hold.
2 Enter the number you wish to call and press
Call.
T62u.book Page 50 Thursday, June 13, 2002 6:47 PM