User's Guide

Voice Control 45
6 Say “Play”, press Yes if it sounds okay. If not, press
No.
Starting a recording using a voice command
1 From standby, press and hold the upper or lower side
volume key until you hear a tone.
2 Release the key, lift the phone to your ear and say
“Record”. The voice command is played back to you
and a tone indicates that the recording has begun.
3 To end the recording, press
Done.
Listening to recordings using a voice command
1 From standby, press and hold the upper or lower side
volume key until you hear a tone.
2 Release the key, lift the phone to your ear and say
“Play”. The voice command is played back to you.
3 Listen to your recordings.
The Magic Word
You can record a Magic Word and use it as a voice
command. Say the Magic Word and then one of your
recorded voice commands. The Magic Word is especially
suitable when using a car handsfree kit.
Turning on and recording the Magic Word
1 Scroll to
Settings, Voice Control, Magic Word.
2 Select or deselect the accessories you want to be able
to use with the Magic Word by pressing
Check or
Uncheck.
3 Wait for the tone and say the Magic Word.
Note!
Choose a long, unusual word which can easily
be distinguished from ordinary background
speech.
Note!
Due to the nature of individual speech patterns
and how your phone generates a matching
Magic Word, false matches may occur through
other sources of speech, like your car radio. If
this happens, record a different Magic Word.
Note!
Turn off the Magic Word when you no longer
need totally handsfree access, in order to save
battery power.
T62u.book Page 45 Thursday, June 13, 2002 6:47 PM