User's Guide

44 Voice Control
5 Lift the phone to your ear, wait for the tone and say
“Answer”, or another word. If the recording sounds
OK, press Yes. If not, press No and repeat step 5.
6 Say “Busy”, or another word.
Answering a call using voice commands
When the phone rings, say “Answer” or the alternative
word you recorded.
The call is connected.
Rejecting a call using voice commands
When the phone rings, say “Busy” or the alternative word
you recorded.
The call is rejected. The caller hears a busy tone or the
call is forwarded to voicemail.
Turning on and record profile commands
1 Scroll to
Settings, Voice Control, Voice Profiles
2Select On.
3 Instructions appear.
4 Select a profile.
5 Press and hold the upper or lower side volume key.
6 Release the key, lift the phone to your ear, and listen
for the tone.
7 Say the profile name. Repeat steps 4 through 6 to
record voice commands for the other profiles.
Changing a profile using voice commands
1 From standby, press and hold the upper or lower side
volume key until you hear a tone.
2 Release the key, lift the phone to your ear and say the
profile command for the desired profile. The profile
command is played back to you and the current profile
is changed.
Recording voice memos
You can record voice memo commands to start or listen
to a voice memo recording.
Turning on and recording voice memo
commands
1 Scroll to
Settings, Voice Control, Voice Memo.
2 Select On.
3 Instructions appear.
4 Press
Yes to proceed.
5 Lift the phone to your ear, wait for the tone and say
“Record”, then press
Yes if it sounds okay. If not, press
No.
T62u.book Page 44 Thursday, June 13, 2002 6:47 PM