User's Guide

Voice Control 43
An icon appears next to a contact name which has a voice
command.
Caller name
You can choose whether or not you want to hear the
recorded contact name when you receive an incoming
call from that contact.
Turning the caller name
On or Off
1 Scroll to Settings, Voice Control, Caller Name.
2 Select On or Off.
Voice dialing
You can voice dial by saying the name of the contact.
Making a call
1 From standby, press and hold the upper or lower side
volume key.
2 Release the key, lift the phone to your ear, and listen
for the tone.
3 After the tone, say a name, for example “John”. The
name is played back to you.
4 If you have several numbers for that contact, after a
second tone, say the number type, for example,
“home”.
The number type is played back to you and the call is
connected.
From standby, you can also initiate voice dialing, voice
profiles and voice memos by:
• Pressing and holding the upper or lower side volume
key.
• Pressing the handsfree button (when using a
portable handsfree device).
• Saying the Magic Word. See “The Magic Word” on
page 45.
Voice answering
You can answer or reject incoming calls by using your
voice, when using a portable handsfree or a car handsfree
kit.
Turning on voice answering and record voice
answer commands
1 Scroll to
Settings, Voice control, Voice Answer.
2 Select
On.
3 Select or deselect the accessories you want to be able
to use with voice answering by pressing
Check or
Uncheck.
4 Instructions appear.
T62u.book Page 43 Thursday, June 13, 2002 6:47 PM