User's Guide

14 Getting Started

Attaching Your Battery Replacing the Back Cover

1 Hold the battery over the back of the phone (the

side that should face up is marked).

2 Locate the connector at the end of the blue, red,

and black wires and insert the plug. It will only fit

one way. Do not force it. If the wires are not

positioned properly, the back cover may not slide

up easily.

3 Holding the battery at a perpendicular angle

(label side up), place the bottom part of the

battery into the cavity. There is a metal clip to

hold the battery in place.

4 Lower the top part of the battery until it lays flat.

This side up

de up

1 Locate the notches along

each side of the back of the

phone.

2 Using the notches as a

guide, slide the back cover

upward.

T62u.book Page 14 Thursday, June 13, 2002 6:47 PM