User Manual

Setting Up Mobile Internet 61
• Dial Type – select analog or ISDN connection.
To create a data account manually
1. Scroll to Settings, Data Comm., Data Accounts, Add
Account?.
2. Enter a name for the data account.
3. Select an access type.
4. Enter the settings that you have received from your
network operator or service provider.
You will be asked to confirm each setting.
5. Scroll to Save? Select
PROCEED to save your changes.
To edit a data account
1. Scroll to Settings, Data Comm., Data Accounts.
2. Select a data account.
3. Select Edit.
4. Select the setting you want to edit. Edit the setting.
5. Repeat step 4 for other settings you want to edit.
Preferred service
You can set GPRS or GSM as the preferred service. This
setting is valid for all data accounts.
• To select preferred mode, scroll to Settings, Data
comm., Preferred Srvc.and select GPRS and GSM or
GSM Only.
WAP profile settings
The WAP settings are stored in a WAP profile. In most
cases you only need to use one profile to access the
Internet. You set up and use additional WAP profiles, for
example, when accessing secure Internet sites, such as a
banking site or a corporate intranet. You then simply
switch between profiles when you need to change the
network connection.
To enter WAP profile settings manually
1. Make sure you have a data account set up between your
phone and the Internet server, as described in “Data
account settings” on page 60.
Note!
If you want to change access type, you have to
create a new data account and select the access
type you want to use.
Note!
To see the status of GPRS coverage and
connection, press the upper or lower side volume
key from standby to enter the Status menu and
then scroll to GPRS.