User Manual

46 Voice Control
To start a recording using a voice command
1. From standby, press and hold the upper or lower side
volume key until you hear a tone.
2. Release the key, lift the phone to your ear and say
“Record”. The voice command is played back to you and
a tone indicates that the recording has begun.
3. To end the recording, press
DONE.
To listen to recordings using a voice command
1. From standby, press and hold the upper or lower side
volume key until you hear a tone.
2. Release the key, lift the phone to your ear and say “Play”.
The voice command is played back to you.
3. Listen to your recordings.
The Magic Word
You can record a Magic Word and use it as a voice
command. Say the Magic Word and then one of your
recorded voice commands from the standby screen. The
Magic Word is especially suitable when using a car
handsfree kit.
Note:
To turn on and record the Magic Word
1. Scroll to Settings, Voice Control, Magic Word.
2. Select or deselect the accessories you want to be able to
use with the Magic Word by pressing CHECK or
UNCHECK.
3. Lift the phone to your ear, wait for the tone and say the
Magic Word.
Editing your voice commands
You can keep all your voice commands up to date by re-
recording them or deleting the ones you do not use.
Tip!
Choose a long, unusual word which can easily be
distinguished from ordinary background speech.
Note!
Due to the nature of your individual speech
patterns and how your phone generates a
matching Magic Word, false matches may occur
through other sources of speech, like your car
radio. If this happens, you may need to record a
different Magic Word.
Tip!
Turn off the Magic Word when you no longer
need totally handsfree access, in order to save
battery power.