User Manual

18 Getting Started

Attaching Your Battery Replacing the Back Cover

Note: Never use your phone with the front or back

cover removed.

1. Hold the battery over the back of the phone (label

side down).

2. Locate the connector at the end of the blue, red,

and black wires and insert the plug. It will only fit

one way. Do not force it.

3. Holding the battery at a perpendicular angle (label

side up), slip the left side of the battery into the

hinge. Snap the right side in.

4. Lower the battery until it lays flat.

This side up

de up

Locate the notches along each

side of the back of the phone.

Using the notches as a guide,

slide the back cover upward.

Press the back cover latch to

allow the back cover to fully

insert. Click the back cover

into place.