User's Manual

4-545-184-01(1)
Operation With a FreFlow® Wireless System
 Wait with the power switch set to ON. You do not need to
make any special operations. Operation will start
automatically when a wireless signal is received.
 Light color will change by wireless command only in a venue
where a FreFlow® wireless system is set up.
 Light color cannot be changed by the color change button
while a wireless signal is being received.
 When a wireless signal is no longer received, you can
operate the product as you like.
How to Replace Batteries
 Push the tab in the direction indicated by the arrow, and
remove the battery box cover.
Tab Cover
 Insert the batteries, making sure the + and – terminals are in
the correct direction, and close the cover securely.
<Improper use of batteries may lead to leaking,
excessive heating, rupture, or damage. Please follow
the cautions below.>
 Set the batteries with the + and – terminals in the correct
direction.
 Remove the batteries when they are depleted or when not
using for a long period of time.
 Do not use or leave in places with intense direct sunlight or in
hot locations such as a car in the sun.
 Use new batteries when replacing the batteries. Do not mix
with old batteries, different types of batteries, etc.
 Do not subject batteries to fire or high temperatures.
 Tape over battery contacts to avoid short-circuit when
disposing of batteries, and follow local regulations for battery
disposal.
Specifications
 Model Name: FFS-R series
 Materials
Grip, cover: ABS / Cylinder: PET
 Power Requirement
Two size AAA (LR03) alkaline batteries: 3.0 V DC
MADE IN VIETNAM
[For inquires]
Antinos Management America, Inc.
[e-mail]
FreFlow® and its logo are trademarks or registered trademarks of
Sony Engineering Corporation.