User's Manual

Settings
The settings screen is displayed on the display panel when the
product is turned on.
Display panel
Default setting values are shown below.
Page 1
Carrier wave : 001/000
Ctrl NodeID : 0001
DMX cntrl CH : 001
DMX FREE CH : 002
Page 2
DMX Rand CH : 003
Reserved : 004
DMX channel : 005-054
ID Count : 10
Page 3
DMX Nosignal : Free
RF Power : 0
B-Cast cntl : ON
Refresh time : 0.5SEC
Page 4
Sleep mode : OFF
Field Test : OFF
To Change Settings
Up button
Enter button
Right button
Left button
Down button
 Press the up or down button to select the setting item you
want to change.
 If you press the down button while the cursor is on the
bottom item, the next page will be displayed. If you press
the up button while on the top item, the previous page will
be displayed.
 Press the left or right button to change the setting value.
 Press the enter button to finalize the setting.
 Setting values are not actually changed until you press the
enter button, even when the values are shown on the
display as having been changed.
Specifications
 Power output: 100 mW
 Operating frequency: 902.2 MHz - 926.7 MHz
 Active channel: 1
 Operation mode: GFSK
 Data rate: 80 kbps
 Antenna cable length: 3 m
 Use: Wireless control of LED lighting devices
 Antenna connector/Gain: SMA (reverse polarity)
 Materials: Urethane
MADE IN JAPAN
FreFlow® and its logo are trademarks or registered trademarks of
Sony Engineering Corporation.