User's Manual

27
Making and Receiving Calls
Incoming Calls
You can receive calls as long as the icon is not displayed. When
you receive a call, the ringer sounds and the LED flashes green with
each ring. Incoming Call flashes on your phone’s display.
Basic call answering
1 Press
SEND
to answer the call.
When the call is connected, the call timer appears.
2 Press
END
to disconnect the call.
The icon disappears and the final elapsed call time flashes for 10
seconds.
Related answering functions
Adjusting volume
The Sounds menu allows you set the various volume settings. To change
the volume of the ringer, earpiece and microphone for individual calls:
Ringer Increase volume Turn Jog Dial up.
while it’s Decrease volume Turn Jog Dial up then down.
ringing Mute the ringer Turn Jog Dial down or
Press
END
.
Earpiece Increase volume Turn Jog Dial up.
during a call Decrease volume Turn Jog Dial down.
Microphone Toggle between Push and hold Jog Dial
during a call mute and unmute
Setting all keys to answer
As an added convenience, you can set your phone to answer incoming
calls with any key (except
PWR
).
1 From the Extras menu, scroll and select AnyKey Answ.
2 Scroll and select on or off.
Note: If AnyKey Answ is on, pressing
END
, will mute the ringer, but
will not answer the call.
SB200 22-28 calls 4/9/99, 2:21 PM27