User's Manual

22
Calling Fundamentals
You can call any number up to 32 digits when you are within a service
area. If you are outside a service area,
appears on the display.
There are several ways to make calls, including dialing manually,
speed dialing, touch dialing or recalling a stored number.
Basic calling
The most basic way to call any phone number is to dial it manually.
1 Enter a phone number on the standby display and press
SEND
.
The phone dials the number and the icon appears. When the
call is connected, the call timer appears.
To correct mistakes Press
CLR
.
To return to standby Hold down
CLR
or press
END
.
2 Press
END
to disconnect the call.
The icon disappears and the final elapsed call time flashes.
Related calling functions
Volume adjustments during a call
Earpiece: Adjust the earpiece volume during a call by simply turning
Jog Dial up to increase and down to decrease.
Speaker: To quickly mute the microphone during a call, push and
hold Jog Dial. Push and hold again to unmute.
Redialing
Last number called
From standby, press
SEND
to automatically redial the last number dialed.
Automatic redial of unsuccessful call attempts
If a phone call doesn’t go through (e.g., busy or no answer), you can
set your phone to redial automatically up to five times.
1 From the Extras menu, scroll and select Auto-Retry.
2 Scroll and select
off, on 60 secs, on 30 secs or on 10 secs.
SB200 22-28 calls 4/9/99, 2:21 PM22