User's Manual

21
Basic
Operations
You can call any number up to 32 digits from within a service area. The
out-of-service icon (
) indicates that you are outside the service area.
In the following example, the phone number to be called is 123-456-7890.
1 Use the number buttons to
enter the number.
If you enter the wrong digit, press
CLR
to back up. To clear all entered digits,
press
END
or hold down
CLR
to return to the standby
display.
2 Press
SEND
to dial.
The phone dials the number you have entered.
The icon appears. When the call is connected, the call
timer appears and displays the elapsed call time.
3 Press
END
to end the call when you are
finished.
The icon disappears and the final elapsed call time
flashes for 10 seconds. The standby display
automatically reappears.
Tips
• When dialing, you can insert a pause to attach a DTMF (Dual Tone
Multiple Frequency) number to the number you are calling (see page 38
for a description of DTMF).
• If Auto-Hyphen is turned on, the phone number is hyphenated
automatically as you enter the digits (see page 68).
• If Minute Alert is turned on, a beep sounds 10 seconds before every full
minute throughout the call (see page 46).
• Enhanced voice privacy is indicated by the message “–P–” displayed in
the upper left corner of the LCD (see page 73). This feature is carrier-
dependent.
Making calls
123-456-7890
:Options
B2200 21-24draft3 8/21/98, 12:12 PM21