User Manual
Table Of Contents
- Overview of CD Technology
- Introduction
- Learning the CD Architect Workspace
- Getting Started
- Basic Editing Techniques
- Advanced Editing Techniques
- Working with Events
- Working with Tracks
- Adding Effects
- Burning Audio CDs
- Customizing CD Architect Software
- Index
Changing the default Master effects
1.
Create or edit the master effects to create a plug-in chain. For information on creating a chain, see Adding a plug-in chain to the Master
bus on page 91. For information on editing a chain, see Editing a plug-in chain on the Master bus on page 93.
2.
Close the Audio Plug-In window when you are satisfied with your plug-in chain.
3.
Right-click the Master bus and choose Set Default Master FX from the shortcut menu.
4.
Click Ye s to use the current Master FX as the default for all new projects.
Restoring the default Master effects
You can remove any user-defined effects and use the CD Architect software defaults.
1.
Right-click the Master bus and choose Restore Default Master FX from the shortcut menu.
2.
Click Ye s to restore the original default Master FX for all new projects.
Note:
The Master effects will not revert to the original default setting until you start a new project.
Adding a plug-in chain to the Master bus
There are two ways to add a plug-in chain to the Master bus: using the Plug-In window or the Plug-In Chooser window.
Note:
By default, CD Architect software is installed with the Dither plug-in already applied to the Master bus. If you want to create a new
plug-in chain for the Master FX, you can delete the Dither effect and create a new plug-in chain, or you can edit the chain to use the effects
you want to use.
Using the Plug-In Chooser window
1.
Click the Master FX button . The Plug-In Chooser window appears.
Note:
If you have deleted all effects from the Master bus, the Master FX button will appear gray. If there are effects currently applied to
the Master bus, the Master FX button will appear green.
Chain area
2.
Select the plug-ins you want to use in your plug-in chain. There are three ways to add a plug-in to the chain:
• Double-click the plug-in.
• Drag the plug-in to the chain area.
• Select the plug-in and click the Add button.
3.
Rearrange the order of plug-ins as needed by dragging plug-ins to different locations in the chain or by selecting a plug-in and
clicking the Shift Plug-In Left and Shift Plug-In Right buttons. For more information, see Arranging the order of plug-ins on
page 95.
ADDING EFFECTS | 91