User Manual

i2M musicport

Desktop Editor Software Manual

Operating Modes

The i2M musicport has four Operating Modes which affect how the MIDI conversion

behaves. Audio input is not affected by these modes in any way, and is always active.

In general use, Operating Modes are selected by pressing the mode button on the

i2M musicport. A short press will toggle the mode between modes 1 and 2, or between

modes 3 and 4. A long press (2s) will toggle between modes 1 and 3, or between modes

2 and 4, as shown in Figure 4.

The currently active Operating Mode is shown on the mode tab of the i2M musicport

desktop software. You can also change the Operating Mode by clicking the appropriate

mode indicator (see Figure 3).

Operating Modes can be thought of as built-in presets, where you can configure four

independent presets to use with different musical instruments or to control different

MIDI

instruments.

The default factory settings of the i2M musicport are such that for the green modes

(Mode 1 and 2) are configured for Guitar, and the orange modes (Mode 3 and 4) are

Figure 3: The mode tab used to edit and select Operating Modes