User Manual

i2M musicport © Copyright 2012 Sonuus Limited 10
Desktop Editor Software Manual
By default, only one zone is active to provide basic MIDI output functionality. Using
additional zones can be a good way to control multiple
MIDI instruments which require
different settings.
Note Gate
The Note Gate acts as an input filter to block or allow notes from your instrument from
being processed by the zone, and then sent as
MIDI messages. This lets you be creative
where, for example, you can have some zones that only respond to bass notes and others
that only respond to treble notes. Each of these zones could be configured for different
MIDI channels and then connected to different MIDI instruments. Then when you play your
instrument, different
MIDI instruments can be triggered when you play different notes.
By default, the Note Gate is configured to accept all notes (range = C
−1
–G
9
).
Hold Enable
As mentioned in “Setup—settings” on page 16, the Hold pedal control allows you to hold
MIDI notes while you continue to play your instrument. To make this feature even more
Figure 6: MIDI Configuration / Zones. The currently active MIDI Configuration is
highlighted so you know if the one you are editing is currently active or not