Manual: Software

i2Mmusicport © Copyright 2010 Sonuus Limited 4
Desktop Editor Software Manual
Operating Modes
The i2Mmusicport has four Operating Modes which affect how the MIDI conversion
behaves. Audio input is not affected by these modes in any way, and is always active.
In general use, Operating Modes are selected by pressing the mode button on the
i2Mmusicport. A short press will toggle the mode between modes 1 and 2, or between
modes 3 and 4. A long press (2s) will toggle between modes 1 and 3, or between modes
2 and 4, as shown in Figure 3.
The currently active Operating Mode is shown on the mode tab of the i2Mmusicport
desktop software. You can also change the Operating Mode by clicking the appropriate
mode indicator (see Figure 4).
Figure 2: Overview of the i2Mmusicport MIDI architecture. This shows the signal flow
from your musical instrument to your
MIDI instrument.
Musical Instrument Input Pre-amp
Pitch detection
MIDI configuration
a
b
c
d
Mode options
Instrument
Legato detect
Zones
1
2
3
4
5
6
gate
Hold Pedal
pitch-bend
chromatic
range transpose constrainer
MIDI channel
USB - MIDI
on
zone hold
MIDI
Mode 1
Mode 2
Mode 3 Mode 4
(short press)
(2s) (2s)
(short press)
Figure 3: How to select Operating Modes when using the button on the i2Mmusicport.