Product guide

Product Guide
8
• Be sure that your cable/DSL modem is connected to the router’s WAN (Internet) port.
• Temporarily remove any other components that are wired to your network.
• Connect an Ethernet cable from the computer directly to the back of the BRIDGE, and then connect another Ethernet
cable from the BRIDGE directly to one of the LAN ports on your router.
• When you make a change to your network configuration, you may need to power cycle the BRIDGE by unplugging the
power cord, and then plugging it back in.
• If you are not using a router, you can visit our Web site at http://faq.sonos.com/norouter for more information.
Not all rooms are visible
You are probably experiencing wireless interference. Change the wireless channel your Sonos system is operating on by
following the steps below.
• Using a handheld Sonos controller: Touch Settings -> Advanced Settings, and then Wireless Channel. Choose another
wireless channel from the list.
• Using the Sonos Controller for PC: Select Settings -> Advanced Settings from the Manage menu, and then select an-
other wireless channel.
• Using the Sonos Controller for Mac: Select Preferences -> Advanced Settings from the Sonos menu, and then select
another wireless channel.
It may take several seconds for the switch to take effect. If you have music playing, a short music dropout may occur during
the wireless channel change.