-1 SONOS USER GUIDE T
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. Sonos and all other Sonos product names and slogans are trademarks or registered trademarks of Sonos, Inc. Sonos Reg. U.S. Pat. & Tm. Off.
The Sonos Home Sound System Sonos is the wireless home sound system that fills as many rooms as you want (up to 32) with music, movies and TV. Listen in any room or every room—play a movie in the living room, a podcast in the kitchen, or the same song everywhere. Explore our products to find out more. • Free Sonos app guides you through setup and provides music control for everyone in the house on all their devices—phones, tablets, and computers.
SONOS USER GUIDE Getting started Here’s what you’ll need: • Wi-Fi—have your network name and password ready. See Sonos requirements. • Mobile device—connected to the same Wi-Fi. You’ll use this for setup. • The Sonos app—you’ll use it to set up and control your Sonos system (install it on the mobile device you’re using for setup). • A Sonos account—If you don’t have an account, you’ll create one during setup. See Sonos accounts for more information.
SONOS USER GUIDE • Your router supports only 802.11n (you can’t change the settings to support 802.11b/g/n). Note: For uninterrupted playback, use and Ethernet cable to connect the computer or NAS drive that has your music library files to your router. If you want to change to wireless setup later, see Switch to wireless setup for more information. Sonos app The Sonos app is available for the following devices: • • • • iOS devices running iOS 9 and later Android 4.4 and higher macOS 10.
SONOS USER GUIDE Album art • • • • JPEG PNG BMP GIF Playlists • • • • Rhapsody iTunes WinAmp Windows Media Player (.m3u, .pls, .
SONOS USER GUIDE Explore our products Sonos products work together seamlessly. It’s easy to add speakers and expand your system as your home changes. Speakers for your music The perfect wireless speaker for any room in your home. You can even stereo pair two speakers (same model) in a room—turn each one into separate left and right channels for wider, bigger, and deeper sound. • • • • Play:1: mini home speaker with mighty sound. Sonos One: smart speaker with built-in voice control.
SONOS USER GUIDE • • • • If your existing Wi-Fi isn't reliable enough for streaming music, you can purchase a Sonos Boost. Wall mount kits or stands tailored to perfectly fit your Sonos products. Turntables to bring vinyl to your Sonos system. Cables and more.
SONOS USER GUIDE The Sonos app Download the app on your mobile device. You’ll use it to set up and control your Sonos system. Once your system is set up, you can also use your computer to control the music. Get the app at www.sonos.com/support/downloads. For the latest system requirements and compatible audio formats, go to https://faq.sonos.com/specs. Things you can do: • • • • • Discover and Play music—explore internet radio, browse and search for music.
SONOS USER GUIDE Tap an icon to find and play music. My Sonos A space to save and play your favorite music and collections so you always know where to find the music you love. Browse Browse through music services, your music library, and music on your mobile device. When you find music you like, start playing it in any room. Rooms See what’s playing in your rooms. Group rooms to play the same music in different rooms or everywhere. Search Search your music sources.
SONOS USER GUIDE From Now Playing, open the queue and tap Edit. • Delete a song—tap (iOS) or • Move a song—touch and hold (Android). and drag the song to a new location. Save a queue as a Sonos playlist From Now Playing, open the queue and tap Save (doesn’t include songs on your mobile device). See Sonos playlists to learn how to save your queue.
SONOS USER GUIDE Sonos One Sonos One has Amazon Alexa built right in so you can use your voice to start and control the music on Sonos— • Perfect fit for shelves, counters, and snug spaces or mounted to a wall, ceiling or speaker stand. • Touch controls let you adjust volume, play and pause, or skip through songs. • Pair two Sonos Ones for left-right stereo sound, or use two Sonos Ones as rear surrounds for your home theater. • See Getting started when you’re ready to add a Sonos One to your system.
SONOS USER GUIDE Controls and lights Volume control • Touch and hold to quickly change the volume: • Volume up (right); Volume down (left). Play/Pause • Press once to play or pause music. • Press and hold to add the music that’s playing in another room. Next/Previous • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station.
SONOS USER GUIDE Speaker mounts and stands For wall mount kits or stands, tailored to perfectly fit your Sonos products, see Accessories on our website. Follow the instructions in the kit. Microphone on/off Touch to turn the microphone on and off. (If you don’t have a voice service installed, the microphone is inactive.) When the microphone light is on, voice control is on and Alexa is ready to respond. When the microphone light is off, voice control is off.
SONOS USER GUIDE Feature Description Power Supply 100 - 240V ~ 50-60 Hz 1A Dimensions (H x W x D) 6.36 x 4.69 x 4.69 (in) / 161.45 x 119.7 X 119.7 (mm) Weight 4.08 lb (1.85 kg) Operating Temperature 32º to 104º F (0º to 40º C) Storage Temperature -4º to 158º F (-20º to 70º C) Humidity Resistant Designed to withstand high-humidity, like in a bathroom with a running shower. (It is not waterproof or water-resistant.
SONOS USER GUIDE Play:1 The mini home speaker with mighty sound— • • • • • Fits in any space, fills any room. Wall or stand mountable. Two custom-designed drivers, 3.5 in / 9 cm mid-woofer and tweeter, each with a dedicated amplifier. Humidity resistant. Perfect for the bathroom (or backyard). Pair two Play:1s for left-right stereo sound, or use two Play:1s as rear surrounds for your home theater. To set it up, see Getting started.
SONOS USER GUIDE Connector panel Threaded mount 1/4" / 20-thread Integrated mounting socket so it can be wall-mounted (bracket not included). See Speaker mounts and stands for more information. Ethernet port Use the supplied Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional). AC power (mains) input Use only the supplied power cord (using a third-party power cord will void your warranty).
SONOS USER GUIDE Feature Description Tweeter One tweeter creates a crisp and accurate high frequency response. Mid-Woofer One mid-woofer ensures the faithful playback of mid-range vocal frequencies plus deep, rich bass. Stereo Pair Turn two speakers into separate left and right channel speakers to create wider, bigger deeper sound. Home Theater Add two speakers as surrounds for a true surround sound experience. Networking* Wireless Connectivity Connects to your home Wi-Fi network with any 802.
SONOS USER GUIDE
SONOS USER GUIDE Play:3 The mid-size home speaker with stereo sound— • • • • Three custom-designed drivers (two mid-range and one tweeter), each with a dedicated amplifier. Position vertically or horizontally—software automatically adjusts the sound to ensure best performance. Pair two Play:3s for left-right stereo sound, or use two Play:3s as rear surrounds for your home theater. See Getting started when you’re ready to add a Play:3 to your Sonos system.
SONOS USER GUIDE Controls and lights Volume up (+) Volume down (-) Play/Pause Press to adjust the volume. Note: You can also use the app. • Press once to play or pause music. • Press twice to skip to the next song (if applicable to the selected music source). • Press three times to go back to the previous song. • Press and hold to add the music playing in another room. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status.
SONOS USER GUIDE Select a location You can put your speaker just about anywhere. For maximum enjoyment, we have a few guidelines: • Position either horizontally or vertically to accommodate the desired space—the EQ (audio equalization) will automatically adjust to create the best possible sound when the orientation is changed. • Designed to work well even when placed next to a wall or other surface. For optimum performance, maintaining more than 1" (2.
SONOS USER GUIDE Feature Ethernet Port Description One 10/100Mbps Ethernet port. You can plug a Sonos product directly into your router if your Wi-Fi is unstable. General Power Supply 100 - 240V ~ 50-60 Hz 2A Dimensions (H x W x D) 5.2 x 10.5 x 6.3 in. (132 x 268 x 160 mm) Weight 5.7 lb (2.6 kg) Threaded mount Standard 1/4"-20 threaded mounting socket.
SONOS USER GUIDE Play:5 Our biggest home speaker with the boldest sound— • Hardware and software custom-designed by Sonos to produce pure, immersive sound that’s crystal clear at any volume. • Powered by three tweeters and three mid-woofers, each with a dedicated amplifier, perfectly tuned to match the speakers and acoustic architecture. • Pair two Play:5s for left-right stereo sound, or use two Play:5s as rear surrounds for your home theater.
SONOS USER GUIDE Controls and lights Volume control Touch and hold to quickly change the volume: • Volume up (right) • Volume down (left) Play/Pause • Press once to play or pause music. • Press and hold to add the music that’s playing in another room. Next/Previous song • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status.
SONOS USER GUIDE Select a location You can put your speaker just about anywhere. For maximum performance, we have a few guidelines: • The Play:5 is a substantial and powerful speaker and should be placed on a flat surface that is robust and durable enough to properly support it. Make sure the Play:5’s rubber feet sit completely on the flat surface. • Allow at least 2" perimeter all around the Play:5 including its power cord.
SONOS USER GUIDE Feature Description Networking* Wireless Connectivity Connects to your home Wi-Fi network with any 802.11b/g/n router. 802.11n only network configurations are not supported—you can either change the router settings to 802.11b/g/n or connect a Sonos product to your router. Ethernet Port One 10/100Mbps Ethernet port. You can plug a Sonos product directly into your router if your Wi-Fi is unstable.
SONOS USER GUIDE Beam The smart, compact soundbar for your TV— • • • • • • Play anything—music, TV, movies, podcasts, radio, audiobooks, and video games. Perfect size to wall-mount above or below your TV, or place on a credenza. Great for small to medium-sized rooms. Microphone on/off so you can use it hands-free. Quick and easy setup, with only one cable to connect to your TV. Expandable. Add a Sub and two Sonos speakers, like Play:1s, for 5.1 surround sound. For more information, see Sonos home theater.
SONOS USER GUIDE Microphone indicator • Tap the microphone light to turn the microphone on or off. • When the light is on, voice control is on and you can use voice commands. • When the light is off, voice control is off. Note: If the light is off, press and hold the Microphone indicator to talk to Alexa. Release the button to turn voice control off again. Indicates the status. For more information, see https://faq.sonos.com/led.
SONOS USER GUIDE • For best sound quality, keep both ends of Beam at least 1' (30cm) from a wall or other obstruction. Wall mounted To put Beam on a wall, see Wall mounting. Connect the cables Before you start 1. Disconnect existing home theater or surround sound equipment from your TV. 2. Connect any external devices, like a cable box or DVD player, directly to your TV. Connect the power cord 1. Insert the power cord firmly into Beam’s AC (mains) power port until it is fully connected.
SONOS USER GUIDE You’ll know it’s an ARC port if you see the word “ARC” on the label. ARC HDMI 2. Connect the HDMI cable to the TV’s HDMI ARC port. TV’s HDMI ARC port Beam’s HDMI port Note: If you can’t find the word “ARC” on the label, it isn’t the correct port, see If your TV doesn’t have an HDMI ARC port. If your TV doesn’t have an HDMI ARC port You’ll need the optical audio adapter. 1. Remove the protective cap from the optical adapter.
SONOS USER GUIDE 2. Attach the optical adapter to the HDMI cable. Remove the protective cap Optical adapter HDMI cable 3. Connect the optical adapter to the TV’s optical digital OUT port. TV’s optical digital OUT port Optical adapter attached to HDMI cable Beam’s HDMI port Note: The optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port. Inserting the adapter incorrectly may damage the cable. If you don’t have the app, download it from the app store.
SONOS USER GUIDE When the microphone light is on, voice control is on and Alexa is ready to respond. When the microphone light is off, voice control is off. If you’ve installed a voice service and the microphone is off, you can still use voice commands. Just press and hold while talking to Alexa—no need to start with a wake word. When you release the mic button, voice control turns off again. Wall mounting Guidelines • • • • Use the Beam wall mount kit. You can buy it on www.sonos.com.
SONOS USER GUIDE 1. Tape the cardboard template to the wall above or below your TV. Use a level. Keep 1" (25mm) space (minimum) for access to Beam’s touch controls. (Don’t install Beam vertically.) 2. Mark the center of the mounting holes and remove the template. 3. Use a 5/16" drill bit to drill pilot holes (see Wall mounting information) 4. Insert and secure the wall anchors (don’t use the anchors if drilling into wood).
SONOS USER GUIDE 5. Place the bracket on the wall and loosely tighten the wall screws to secure the bracket. Check with a level and then tighten the screws. 6. Connect the power and HDMI cables to Beam.
SONOS USER GUIDE 7. Place Beam on the bracket. 8. Insert and tighten Beam to the bracket using the mounting screws.
SONOS USER GUIDE Wall mounting information Wall Material Pre Drill Use Wall Anchors Use Screws Wood Stud 1/8" / 3mm bit No Yes Drywall (no stud) 5/16" / 8mm bit Yes Yes Hard wallboard or double board 5/16" / 8mm bit Yes Yes Plaster 5/16" / 8mm bit No, requires toggle bolt Yes Concrete or Brick 5/16" / 8mm bit Yes Yes Specifications Feature Description Audio Amplifier Five Class-D digital amplifiers.
SONOS USER GUIDE Feature Description Voice Control Integrated voice control. System Requirements TV with HDMI ARC or optical digital audio output, broadband internet, and the Sonos app. Networking* Wireless Connectivity See Sonos requirements. Ethernet Port One 10/100 Mbps Ethernet port. You can plug a Sonos product directly into your router if your Wi-Fi is unstable. General Power Supply 100 - 240V ~ 50-60 Hz 2.5A Dimensions (H x W x D) 2.68" H x 25.63" W x 3.
SONOS USER GUIDE Playbar Home theater soundbar and streaming music speaker in one— • • • • Sophisticated 9-speaker design. Simple two-cord setup. One for power. One for your TV. Mount horizontally above or below the TV or place flat on a TV stand. Easily expandable. Add a Sub and two Sonos speakers for 5.1 surround sound. For more information, see Sonos home theater. • See Getting started when you’re ready to add a Playbar to your Sonos system.
SONOS USER GUIDE Controls and lights Volume up (+) Volume down (-) Play/Pause Press to adjust the volume. Note: You can also use the app and remote control. • Press once to play or pause music. • Press twice to skip to the next song (if applicable to the selected music source). • Press three times to go back to the previous song. • Press and hold to add the music playing in another room. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status.
SONOS USER GUIDE Ethernet ports (2) Use the supplied Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional). Digital audio IN (optical) Use an audio optical cable to connect the Playbar to your TV. Optical input supports Dolby Digital and stereo. AC power (mains) input Use only the supplied power cord (using a third-party power cord will void your warranty). Note: Insert the power cord firmly until it is flush with the speaker.
SONOS USER GUIDE • Keep both ends of the Playbar at least 1' (30cm) from a wall or other obstruction. Wall mounted To put Playbar on a wall, see Wall mounting. Connect the cables Before you start 1. Disconnect existing home theater or surround sound equipment from your TV. 2. Connect any external devices, like a cable box or DVD player, directly to your TV. Connect the soundbar to your TV 1. Remove the protective cap from each end of the optical audio cable. 2.
SONOS USER GUIDE Note: The Playbar’s digital audio IN port and the optical cable are ‘D-shaped’—make sure the connector aligns correctly into the port. TV’s Digital Audio OUT (optical) IMPORTANT: Remove the protective caps from each end of the optical audio cable before inserting. Playbar’s Digital Audio IN (optical) Connect the power cord Attach the power cord and plug in the Playbar. Push the power cord in firmly until it is flush with the surface.
SONOS USER GUIDE What you need • • • • Masking tape Pointed tool (like an awl) Phillips head screw driver Power drill with Phillips head attachment Note: There are 2 spare screws (and anchors) included in the kit. Use these to provide additional reinforcement if you’d like. 1. Tape the template to the wall above or below your TV. Use a level. 2" (50mm) For best audio performance, orient the connector panel AWAY from the TV. 1" (25mm) 2.
SONOS USER GUIDE 4. Drill pilot holes. Wall mounting information Wall Material Pre Drill Use Wall Anchors Use Screws Wood Stud 1/8" (3mm) bit No Yes Drywall (no stud) 3/16" (4.5mm) bit Yes Yes Hard wallboard or double board 3/16" (4.5mm) bit Yes Yes Plaster 1/4" (6.5mm) bit Yes Yes Concrete or Brick 1/8" (3mm) bit Yes Yes 5. Insert and secure the wall anchors (don’t use the anchors if drilling into wood). 6.
SONOS USER GUIDE 7. Hang the Playbar securely on the bracket pegs. Specifications Feature Description Audio Amplifier Nine Class-D digital amplifiers perfectly tuned to match the nine dedicated speaker drivers and the acoustic architecture. Tweeter Three tweeters create the crispest and clearest high-frequency response. Mid-Woofer Six mid-woofers give you the full range of sound effects and music from the left and right channels, and crisp, clear dialog from the center.
SONOS USER GUIDE Feature Description Dimensions (H x W x D) 3.35" (H) x 35.43" (W) x 5.51" (D), 85mm (H) x 900mm (W) x 140 mm (D) Weight 11.9 lb (5.4 kg) Operating Temperature 32°F to 104°F (0°C to 40°C) Storage Temperature -4°F to 158°F (-20°C to 70°C) Multiple Orientations Mount Playbar on the wall either above or below your TV, or lay flat on your TV table. Control Use your remote control, voice, touch controls or the Sonos app.
SONOS USER GUIDE Playbase Full-theater sound and music streaming for TVs on stands and furniture— • • • • Slim tabletop design practically disappears under your TV. Securely supports TVs up to 75 lb (34 kg). Simple two-cord setup. One for power. One for your TV. Easily expandable. Add a Sub and two Sonos speakers for 5.1 surround sound. For more information, see Sonos home theater. • See Getting started when you’re ready to add a Playbase to your Sonos system.
SONOS USER GUIDE Controls and lights Volume control Play/Pause Next/Previous song • Touch and hold to quickly change the volume: • Volume up (right); Volume down (left). Press to play or pause sound. • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status. For more information, see https://faq.sonos.com/led.
SONOS USER GUIDE AC power (mains) input Use only the supplied power cord (using a third-party power cord will void your warranty). Note: Insert the power cord firmly until it is flush with the speaker. Join button Press to connect during setup. Select a location You can place the Playbase under your TV or on a shelf. Under TV with single foot stand • Lift the TV and put Playbase under it with the Sonos logo facing front. • Make sure the TV stand rests completely on the Playbase with no overhang.
SONOS USER GUIDE 2. Connect any external devices, like a cable box or DVD player, directly to your TV. Connect Playbase to your TV 1. Remove the protective cap from each end of the optical audio cable. 2. Connect the optical audio cable from your TV’s digital audio OUT (optical) to the Playbase’s digital audio IN (optical). Don’t twist or bend the cable. Note: The Playbase’s digital audio IN port and the optical cable are ‘D-shaped’—make sure the connector aligns correctly into the port.
SONOS USER GUIDE Specifications Feature Description Audio Amplifier Ten Class-D digital amplifiers. Speakers Ten amplified speaker drivers—six midrange and three tweeters and one woofer. System Requirements TV with optical audio output, broadband Internet, and the Sonos app. Networking* Wireless Connectivity Connects to your home Wi-Fi network with any 802.11b/g/n router. 802.11n only network configurations are not supported—you can either change the router settings to 802.
SONOS USER GUIDE Amp Amp features a built-in state-of-the-art digital amplifier that can power large or small speakers so you can enjoy superior audio in any room. • • • • • Power your bookshelf, floor-standing, in-wall, and in-ceiling speakers. Connect to your TV to create the ultimate entertainment system. Stream everything you love with the Sonos app and AirPlay. Plug in any audio device, like a turntable or a phone, and listen out loud.
SONOS USER GUIDE Play/Pause Next/Previous (Music only) Touch to play or pause sound. • TV—When the TV is on, touch to toggle the sound on and off. • Music—When the TV is off, touch to pause or restart music. • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station. IR sensor The IR (InfraRed) sensor receives signals sent by a remote control.
SONOS USER GUIDE Analog audio in Use a standard RCA audio cable to connect Amp’s analog audio inputs to the audio outputs from a separate audio component, such as a turntable or a portable music player. Ethernet ports (2) Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional). Subwoofer output Connect a powered subwoofer to this output using a standard RCA cable.
SONOS USER GUIDE Connect the cables Attach desired speakers Your speakers’ power rating should be at least 125W for 8 ohm speakers, and at least 200W for 4 ohm speakers. Do not connect speakers rated at less than 4 ohm. Note: Amp can drive speakers with nominal impedance above 4 ohms. Two pairs of 8 ohm speakers wired in parallel are also supported. Don’t wire your speakers in series because it will result in poor sound quality. 1. Remove the cap from the banana plug to reveal the connection hole. 2.
SONOS USER GUIDE It may be on the back or side of your TV. Look for the port with “ARC” on the label. ARC HDMI 2. Connect the HDMI cable to the TV’s HDMI ARC port. Note: If you can’t find a port with the word “ARC” on the label, your TV doesn’t have an HDMI ARC port. See If your TV doesn’t have an HDMI ARC port. If your TV doesn’t have an HDMI ARC port You’ll need the optical audio adapter. 1. Remove the protective cap from the optical adapter. 2. Attach the optical adapter to the HDMI cable.
SONOS USER GUIDE Line-in See From other audio devices to learn how to connect an external source like a pre-amplified turntable to any Sonos speaker that has a line-in connection. Change from stereo to mono Amp plays audio in stereo by default. You can set it so that Amp plays in two mono channels when playing music. 1. Tap > Settings > Room Settings and select the room. 2. Tap Advanced Audio > Stereo/Mono, then choose an option.
SONOS USER GUIDE Feature Description Storage Temperature -4°F to 122°F (-20°C to 50°C) Product Finish Black Package Contents Sonos Amp, Sonos banana plugs (2), AC power cord, warranty and regulatory booklet, and Quickstart Guide. * Specifications subject to change without notice.
SONOS USER GUIDE
SONOS USER GUIDE Connect:Amp The amplified music streaming upgrade for your favorite indoor or outdoor speakers— • • • • • Plug in any audio device, like a turntable or a phone, and listen out loud. Built-in amplifier powers large or small speakers. RCA line-in for connecting a range of playback sources. Pairs with your Sonos home theater speaker for surround sound using your favorite non-Sonos speakers. See Getting started when you’re ready to add a Connect:Amp to your Sonos system.
SONOS USER GUIDE Connector panel Analog audio in Subwoofer output Ethernet ports Voltage select AC power (mains) input Right speaker terminals Left speaker terminals Ethernet ports (2) You can use an Ethernet cable (supplied) to connect to a router, computer, or additional network device like a network-attached storage (NAS) device.
SONOS USER GUIDE Your speaker’s power rating should be at least 55W for 8 ohm speakers, and at least 100W for 4 ohm speakers. Don’t connect speakers rated at less than 4 ohms. 1. Use your thumb or finger to firmly push the spring-loaded speaker connector post inward to reveal the connection hole. 2. Insert the stripped end of the speaker wire into the hole, and then release. The stripped portion should be caught firmly in the connector post.
SONOS USER GUIDE Feature Description Subwoofer Output Auto-detecting RCA type, 80 Hz crossover Home Theater Pairs with a Sonos home theater speaker for a true surround sound experience. You must use Ethernet cables to connect both Sonos products to your router when you use Connect:Amp for surround sound. Networking* Wireless Connectivity Connects to your home Wi-Fi network with any 802.11b/g/n router. 802.
SONOS USER GUIDE Connect The instant music streaming upgrade for your existing stereo or receiver— • • • • • Brings music streaming to the audio equipment you already own. Flexible. Features analog, optical and coaxial digital audio outputs. Line-in. Plug in any device you desire. Stream LPs from your amplified turntable to Sonos speakers in any room. See Getting started when you’re ready to add a Connect to your Sonos system.
SONOS USER GUIDE Controls and lights Volume up (+) Volume down (-) Play/Pause Press to adjust the volume. Note: You can also use the app. • Press once to play or pause music. • Press twice to skip to the next song (if applicable to the selected music source). • Press three times to go back to the previous song. • Press and hold to add the music playing in another room. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status.
SONOS USER GUIDE Analog audio in Use a standard RCA audio cable (supplied) to connect the audio outputs from a separate audio component, like a pre-amplified turntable, to the Sonos Connect’s analog audio inputs. Analog audio out Use a standard RCA audio cable (supplied) to connect the Sonos product’s analog audio outputs to the audio inputs on a separate audio component, like an amplifier or your home theater receiver.
SONOS USER GUIDE If connecting to a home theater or amplifier • If you have digital inputs on your home theater or amplifier, you can use either a TOSLINK optical audio cable or a digital coaxial cable to connect the Sonos Connect’s digital output to the digital input on the receiver. • If you have analog inputs on your home theater or amplifier, use a standard RCA audio cable to connect the Sonos Connect’s analog audio output to the audio inputs on the receiver.
SONOS USER GUIDE Note: When you change the line-out level to Fixed on your Sonos Connect you won’t be able to adjust the volume or the equalization settings using a Sonos app. Control the volume from Sonos 1. Adjust your home theater or amplifier’s volume to typical listening volume. 2. If the line-out level is not currently set to Variable, you’ll need to change it. Go to > Settings > Room Settings. Select the Sonos product attached to the receiver. Select Line-Out Level and choose Variable. 3.
SONOS USER GUIDE Feature Description Power Supply 100 - 240V ~ 50-60 Hz 100mA Dimensions (H x W x D) 2.91 x 5.35 x 5.51 in (74 x 136 x 140 mm) Weight 1.5 lb (.69 kg) Operating Temperature 32º to 104º F (0º to 40º C) Storage Temperature -4º to 158º F (-20º to 70º C) Product Finish Light gray/high quality polycarbonate material Package Contents Sonos Connect, power cord, Ethernet cable, RCA stereo audio cable, stereo mini (male) to RCA (male) Y audio cable, Quickstart Guide, and legal booklet.
SONOS USER GUIDE Sub The Sonos Sub takes your audio experience to the next level— • Instantly adds a dimension of deep bass impact to your audio listening experience. • Allows placement anywhere because it’s wireless and compact—position it vertically or horizontally on any floor surface. • The top of the acoustic slot doubles as a handle so you can lift it. • See Getting started when you’re ready to add a Sub to your Sonos system.
SONOS USER GUIDE Controls and lights Join button Press to connect during setup. Status light Indicates the status. For more information, see https://faq.sonos.com/led. Connector panel Ethernet port Use an Ethernet cable to connect the Sub to your home network. AC power (mains) input Use only the supplied power cord to connect to a power outlet (using a third party power cord will void your warranty). Be sure to use the proper power adapter for your country.
SONOS USER GUIDE Note: The Sub contains strong magnets. Don’t place the Sub near equipment that is sensitive to magnetic fields. Attach the feet If you’re placing Sub horizontally on a floor, you can attach permanent felt feet (included) to protect your floor. If you’re putting it on a rug or using it vertically, no need to adhere the felt feet. Note: The felt feet are not removable—a strong adhesive will keep them permanently attached to the Sub. 1. Lay the Sub down so the Sonos logo is facing down.
SONOS USER GUIDE Connect the cables Attach the power cord and plug in the Sub. Be sure to push the power cord firmly into the Sub until it is flush with the surface. If you don’t have the app, download it from the app store. You’ll use it to set up and control your Sonos system. See Getting started. Make sure you set up at least one speaker before adding the Sub. Note: After the Sub is paired with a Sonos speaker, you won’t see it displayed separately in Rooms.
SONOS USER GUIDE 4 Bookshelf / Ceiling 80 Hz 5 6 70 Hz Floor 60 Hz 7 50 Hz Recalibrate the Sub After initial setup, you may wish to make some adjustments to optimize your Sub’s performance. If you move the Sub to another location, purchase new speakers, or simply want to adjust the sound, follow the steps below to recalibrate the Sub. You can only do this with an Android device. 1. Select > Settings > Room Settings. 2. Select the room that is associated with the Sonos Sub.
SONOS USER GUIDE Feature Description Speakers Two force-canceling speakers positioned face-to-face for deeper, richer sound and zero cabinet buzz or rattle. Dual Acoustic Ports Tuned to enhance the Sub performance. Frequency Response Plays down to 25 Hz. All Digital Sound All filter settings, active equalization, and time alignment are done digitally through state-of-the-art DSP (Digital Signal Processing) circuitry for zeroloss audio quality and energy.
SONOS USER GUIDE Boost For when existing Wi-Fi isn't reliable enough for streaming music— • Boost broadcasts 360° signals through walls and ceilings for flawless coverage. • Streams without interference in the most challenging Wi-Fi environments. • Bypasses your Wi-Fi to create a separate high-performance wireless network just for Sonos speakers. When to use a Boost • Your Wi-Fi is slow or temperamental, or your network is already in high demand with streaming video, gaming, and internet usage.
SONOS USER GUIDE Controls and lights Join button Press to connect during setup. Status light Indicates the status. For more information, see https://faq.sonos.com/led. Connector panel Ethernet ports AC power (mains) input Ethernet ports (2) Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional). AC power (mains) input Use only the supplied power cord (using a third-party power cord will void your warranty).
SONOS USER GUIDE Note: Pan head screws will also work. 3. Place the Boost on the wall and slide straight down, allowing the screw head to slip behind the smaller end of the keyhole slot on the back of the Boost. Specifications Feature Description Ethernet Connection 2-port switch, 10/100 Mbps, auto MDI/MDIX Network Bridging 2-port switch allows a connection to your network or to other Sonos speakers.
SONOS USER GUIDE Rooms You can group all your speakers together to play the same music for a party, or let everyone in the house listen to something different. Tap to see what’s playing in each room. See Room settings to customize a room. Play music anywhere Play different music in any or every room: • If you’re on the Now Playing screen, just tap to choose where you want the music to play. Or • If you’re browsing, tap and select Play in Another Room.
SONOS USER GUIDE Change room name If you move your speaker to a new room, you can change its name. Tap > Settings > Room Settings and choose a room to rename it. Turn off the white light There’s a white light near the volume controls on each speaker to indicate that it’s on and working fine. If the light is distracting, you can turn it off. If it ever flashes orange, go to http://faq.sonos.com/led for additional information.
SONOS USER GUIDE • Your favorite listening position should be 8 to 12 feet from the paired speakers—less distance increases bass, more distance improves stereo imaging. Create a stereo pair 1. Tap > Settings > Room Settings. 2. Choose a speaker and tap Create Stereo Pair. After you pair your speakers, the room name includes (L + R). Separate a stereo pair 1. Tap > Settings > Room Settings. 2. Choose the stereo pair (room name includes (L + R)) and tap Separate Stereo Pair.
SONOS USER GUIDE Sonos home theater Sonos products for your TV provide full-theater sound and play music too. • Beam: compact soundbar with Amazon Alexa voice control, perfect for small to medium-sized rooms. Place on furniture or wall mount. • Playbase: widescreen sound and music streaming, created especially for TVs on stands or furniture. Low profile design practically disappears under your TV.
SONOS USER GUIDE Remove surrounds If the speakers were part of your Sonos system before you added them as surrounds, they’ll revert back to their previous room names. Otherwise, they’ll appear as Unused in Rooms. 1. Tap > Settings > Room Settings. 2. Choose the room with the surround speakers (name includes (+LS+RS)) and tap Remove Surrounds. Add a Sub The Sonos Sub takes your audio experience to the next level— • Powerful, deep impact bass for your home theater and your music.
SONOS USER GUIDE Makes TV dialog easier to hear. Tap on the Now Playing screen to turn on or off. Night Sound Enhances quiet sounds and reduces the intensity of loud sounds. Turn on to reduce the volume while still experiencing proper balance and range. Tap on the Now Playing screen to turn on or off. Program your remote control During setup, you’ll program your remote control. You can program a different remote control any time. 1. Open the app and tap > Settings > Room Settings.
SONOS USER GUIDE 1. Use the TV’s volume buttons to turn the volume completely down. Don’t use the Mute button. 2. Use only the volume buttons on your Sonos app to adjust the volume. Turn off volume control messages Some TVs may show volume control messages when you adjust the volume, even after you turn off your TV speakers. (If you have Beam, this happens if it’s connected to your TV using the optical adapter.) You may be able to program your remote control to turn off these messages. 1.
SONOS USER GUIDE Voice services To use Alexa with Sonos, you’ll need the Alexa app with the Sonos skill enabled—if you don’t have it, we’ll guide you through the process when you add a voice service. Add a voice service 1. Open the Sonos app on your mobile device. 2. Tap > Voice Services and select the voice service. • You’ll make changes in both the Sonos and Alexa apps—we’ll guide you through it. • You’ll need your Sonos account info. If you can’t remember it, tap > Settings > Sonos Account.
SONOS USER GUIDE Play music You can get the music playing on Sonos a number of ways—choose whichever control works best in the moment. Use the Sonos app, your own music service app, ask Alexa, or use AirPlay to stream audio to Sonos. If you’re near a speaker, use the controls on your speaker to resume an earlier listening session or change the song. If you want to change where the music is playing, see Play music anywhere.
SONOS USER GUIDE Play/Pause • Press once to play or pause music. • Press and hold to add the music that’s playing in another room. Next/Previous • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station. On Play:1, Play:3, Playbar, Connect:Amp, and Connect: Volume up (+) Volume down (-) Press to adjust the volume. Note: You can also use the app. • Press once to play or pause music.
SONOS USER GUIDE You can also AirPlay directly from many of you favorites apps. Grouping non-compatible AirPlay speakers To choose whether or not your speakers that aren’t AirPlay-compatible stay grouped with speakers that are playing AirPlay, tap > Settings > AirPlay.
SONOS USER GUIDE Music sources Sonos gives you easy access to all the music you love—play your favorite artist’s newest single from Spotify, your favorite playlist from your phone, a local news radio station, and much more. • • • • Radio by TuneIn: select from more than 100,000 free internet radio stations, podcasts, and shows. Music services: explore and manage your music services—add your own or try something new. Stored on your mobile device: play music you’ve downloaded to your phone or tablet.
SONOS USER GUIDE 3. Click next to the station you want to edit, and choose Edit Radio Station. 4. Change the streaming URL or the station name. Music services Free. Premium. Curated. On-demand. Sonos works seamlessly with most music and content services, as well as downloads from any service offering DRM-free tracks. Service availability varies by region. For a complete list, see http://www.sonos.com/music. Add a music service 1. Tap > Add Music Services. 2.
SONOS USER GUIDE From your music service app You can control Sonos directly from some music apps (like Spotify and Deezer). Just open your music service app and connect to a Sonos room or group to start the music. Stored on your mobile device If you have AirPlay devices in your home, music stored on your mobile device may not be available. 1. Connect your mobile device to the same Wi-Fi as Sonos. 2. Tap > On this Mobile Device.
SONOS USER GUIDE Schedule automatic updates 1. Tap > Settings > Manage Music Library. 2. Turn on Schedule Music Index Updates. 3. Tap Music Index Update Time, and select the time. Play music from imported playlists Sonos is compatible with iTunes playlists, as well as M3U, WPL and PLS playlist files created with third-party software. Sonos doesn’t change music or playlist files created by other applications; these files are read-only. 1. Drop the playlist file (.PLS, .M3U or .
SONOS USER GUIDE 2. Check the compilation checkbox. 3. Select View > Column Browser > Group Compilations. 4. In the Sonos app, tap > Settings > Manage Music Library > Compilation Albums. 5. Tap Use iTunes Compilations. Play music from UPnP servers Sonos plays music from compatible UPnP servers on your Wi-Fi. 1. Enable UPnP in your music service app. 2. Tap > Settings > Advanced Settings and turn on Show UPnP Servers.
SONOS USER GUIDE provide the optimal playback experience. Sonos recommends you don’t change this default. However, if you decide to make a change, we recommend the following usage guidelines: Use Uncompressed if: • You want optimal performance with home theaters. • You want to produce the highest quality sound for your Sonos system (this selection requires more network bandwidth than compressed audio.) Use Compressed if: • You are connecting more than 4 rooms wirelessly.
SONOS USER GUIDE Save your favorites When you find music you love, just add it to My Sonos so the music you love is easy to find. You can save, play, and manage your favorite music and playlists all in one place. Note: You can’t save songs on your mobile device to My Sonos because they travel with you and aren’t always available to play on your Sonos system. Add favorites to My Sonos 1. Find your favorites: • Tap or to discover music. • If you’re listening to music you love, go to Now Playing. 2.
SONOS USER GUIDE • Move a song—touch and hold and drag the song to a new location.
SONOS USER GUIDE Alarms and sleep timer Wake to music that you love by setting an alarm with a favorite song, station or playlist. Set an alarm 1. Tap > Alarms > New Alarm. 2. Select the time and other settings, including: • Room: Set the alarm to play in a room or group of rooms • Music: Choose the music to hear when waking up • Alarm Duration: Set the alarm to sound for any amount of time • Snooze Alerts: Turn on Snooze Alerts when you want the option to sleep a little longer.
SONOS USER GUIDE Sonos system updates Sonos regularly adds new features so your listening experience is always improving. Your Sonos speakers can update automatically in the background so you always have the latest features without interrupting your listening. 1. Go to More > Settings > System Updates. 2. Turn on automatic updates and tap Schedule to select a time. (Your system won’t update if music is playing or a Sonos alarm is scheduled during the selected timeframe.
SONOS USER GUIDE Settings Tap > Settings to customize the app and your home’s sound. Sonos accounts During setup you’ll create a Sonos account that you’ll use to manage and expand your Sonos system—both in the app and on www.sonos.com. If you need to verify your user ID, change a password, or transfer your account to a different email address, tap > Settings > Account Settings. If you don’t see Account Settings, check to see if there’s a Sonos update available.
SONOS USER GUIDE Note: If you’re playing audio from another source, using AirPlay or Bluetooth, listening through headphones, or have Apple VoiceOver enabled, you won’t be able to use your mobile device’s buttons. • On an Android device, tap • Show Notifications > Settings > Advanced Settings and turn on these options: • Show Lock Screen Controls • Allow Volume Control on Home Screen Parental controls You can restrict access to explicit music. Tap > Settings > Parental Controls.
SONOS USER GUIDE Connect your device to SonosNet Connecting a Sonos Boost or speaker to your router creates a dedicated wireless network just for Sonos. This helps in homes where wireless performance is not reliable. If you’ve got Sonos set up this way, you can also set your Android device to connect to SonosNet instead of your Wi-Fi. Note: If you use your Android device to stream large amounts of data, like watching HD videos, this might negatively affect Sonos’ performance.
SONOS USER GUIDE Got a new router or network password? If you have a wireless setup (no Sonos product connected to your router): After you install a new router or change your network password, update your Sonos system with the new network information. Just open the Sonos app and we’ll walk you through it.
SONOS USER GUIDE Turn off Sonos To stop the music in a room or group, pause or stop the music in the app or on the speaker. Sonos uses minimal electricity when it is not playing music.
SONOS USER GUIDE Important safety information Please read these instructions and heed all warnings. Keep them in a convenient location and make sure everyone in the household is aware of them. Location • Don’t use the unit near water. • Don’t expose apparatus to dripping or splashing and don’t place objects filled with liquids, such as vases, on the apparatus. • Don’t place the unit where it will be exposed to excessive heat (e.g.
SONOS USER GUIDE openings, the unit has been exposed to rain or moisture, or the unit has been dropped. Warning: To reduce the risk of fire or electric shock, don’t expose this apparatus to rain or moisture.
SONOS USER GUIDE Product guide feedback? We’d love to hear from you! We’ll read your feedback carefully and use it to help us improve our product guides. Write to us at: docfeedback@sonos.com If you’re having a problem with your Sonos system, please contact Customer Care so they can help. Email them a support@sonos.comt. Need more help? • Tap > Help & Tips to get some simple tips for getting the most out of your speakers. • Visit our Frequently Asked Questions (FAQ) pages at www.sonos.com/support.
