User's Guide

SONOS PLAY:1
13
Indicator Light Explanations
PLAY:1 Status Indicator State Additional Information
Solid white Powered up and
associated with a Sonos
system
Solid green Volume set to zero
Flashing white Powering up
Flashing green and white Not associated with a
Sonos system
Slow flashing green Surround audio is off When PLAY:1 used as a PLAYBAR surround speaker
Rapid flashing amber Playback / Next Track
failed
Play/Pause LED flashes amber rapidly if either playback or next track fails
Solid amber Warning mode The PLAY:1 is beginning to experience a fault condition and will reduce to
75% volume.
•Check the vent slot for adequate cooling
• Check for speaker short circuit
• Check the room temperature to make sure it’s less than 104°F/ 40° C
• If the PLAY:1 is in direct sunlight, provide shade
Mute and then unmute the Sonos component
Unplug the PLAY:1 for several minutes to allow it to cool
Flashing amber and then white Fault mode If the fault condition (above) is not remedied, the Sonos component will
automatically mute itself to prevent damage.