User Guide Part 2

Sonos Digital Music System User Guide5-26
Connecting a Line-In Music Source
You can play music from an external line-in music source such as a CD player or
portable music player that is connected to your Sonos Digital Music System.
To connect a line-in music source
1. Use a standard RCA cable to connect the outputs from the external source to the
Audio in connections on the back of your ZonePlayer.
2. From the Music menu, select Line-In Sources and touch OK.
3. Use the scroll wheel to select the zone where the external source is connected,
and touch OK.
Note: You can listen to music from an external device in any zone, and use the
Sonos Digital Music System to control the volume settings. However, you must
control the playback (forward, pause, etc.) from the line-in source. If you have WMA
encoding selected, you will notice a slight delay before the music starts to play.
Analog audio in